In order to fully reset the state of the MIPI controller we must assert
this reset.
This is slightly more complicated than it could be in order to maintain
compatibility with device trees that do not specify the reset property.
Signed-off-by: John Keeping <j...@metanate.com>
Reviewed-by: Chris Zhong <z...@rock-chips.com>
---
v3:
- Add Chris' Reviewed-by
Unchanged in v2
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index 58cb8ace2fe8..cf3ca6b0cbdb 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
+#include <linux/reset.h>
#include <linux/mfd/syscon.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
@@ -1124,6 +1125,7 @@ static int dw_mipi_dsi_bind(struct device *dev, struct
device *master,
of_match_device(dw_mipi_dsi_dt_ids, dev);
const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
struct platform_device *pdev = to_platform_device(dev);
+ struct reset_control *apb_rst;
struct drm_device *drm = data;
struct dw_mipi_dsi *dsi;
struct resource *res;
@@ -1162,6 +1164,34 @@ static int dw_mipi_dsi_bind(struct device *dev, struct
device *master,
return ret;
}
+ /*
+ * Note that the reset was not defined in the initial device tree, so
+ * we have to be prepared for it not being found.
+ */
+ apb_rst = devm_reset_control_get(dev, "apb");
+ if (IS_ERR(apb_rst)) {
+ if (PTR_ERR(apb_rst) == -ENODEV) {
+ apb_rst = NULL;
+ } else {
+ dev_err(dev, "Unable to get reset control: %d\n", ret);
+ return PTR_ERR(apb_rst);
+ }
+ }
+
+ if (apb_rst) {
+ ret = clk_prepare_enable(dsi->pclk);
+ if (ret) {
+ dev_err(dev, "%s: Failed to enable pclk\n", __func__);
+ return ret;
+ }
+
+ reset_control_assert(apb_rst);
+ usleep_range(10, 20);
+ reset_control_deassert(apb_rst);
+
+ clk_disable_unprepare(dsi->pclk);
+ }
+
ret = clk_prepare_enable(dsi->pllref_clk);
if (ret) {
dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
--
2.11.0.197.gb556de5.dirty
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
