Hi Dan,
Thanks for the report.
On Wed, Feb 08, 2017 at 09:39:51AM +0300, Dan Carpenter wrote:
> Hello Shawn Guo,
>
> The patch 4e986d3705df: "drm: zte: add overlay plane support" from
> Nov 16, 2016, leads to the following static checker warning:
>
> drivers/gpu/drm/zte/zx_plane.c:170 zx_vl_rsz_setup()
> warn: always true condition '(fmt >= 0) => (0-u32max >= 0)'
I will send a follow-up patch to fix it by changing 'fmt' to type 'int'.
>
> drivers/gpu/drm/zte/zx_plane.c
> 156 static void zx_vl_rsz_setup(struct zx_plane *zplane, uint32_t format,
> 157 u32 src_w, u32 src_h, u32 dst_w, u32
> dst_h)
> 158 {
> 159 void __iomem *rsz = zplane->rsz;
> 160 u32 src_chroma_w = src_w;
> 161 u32 src_chroma_h = src_h;
> 162 u32 fmt;
> ^^^^^^^
> 163
> 164 /* Set up source and destination resolution */
> 165 zx_writel(rsz + RSZ_SRC_CFG, RSZ_VER(src_h - 1) |
> RSZ_HOR(src_w - 1));
> 166 zx_writel(rsz + RSZ_DEST_CFG, RSZ_VER(dst_h - 1) |
> RSZ_HOR(dst_w - 1));
> 167
> 168 /* Configure data format for VL RSZ */
> 169 fmt = zx_vl_rsz_get_fmt(format);
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> If fmt is -EINVAL then don't we just want to return anyway?
The zx_vl_rsz_setup() is being called by atomic update function, which
can not fail anyway. So we give it a best effort by going through the
hardware update procedure but skip invalid format.
Shawn
>
> 170 if (fmt >= 0)
> 171 zx_writel_mask(rsz + RSZ_VL_CTRL_CFG,
> RSZ_VL_FMT_MASK, fmt);
> 172
> 173 /* Calculate Chroma height and width */
> 174 if (fmt == RSZ_VL_FMT_YCBCR420) {
> 175 src_chroma_w = src_w >> 1;
> 176 src_chroma_h = src_h >> 1;
> 177 } else if (fmt == RSZ_VL_FMT_YCBCR422) {
> 178 src_chroma_w = src_w >> 1;
> 179 }
> 180
> 181 /* Set up Luma and Chroma step registers */
> 182 zx_writel(rsz + RSZ_VL_LUMA_HOR, rsz_step_value(src_w,
> dst_w));
> 183 zx_writel(rsz + RSZ_VL_LUMA_VER, rsz_step_value(src_h,
> dst_h));
> 184 zx_writel(rsz + RSZ_VL_CHROMA_HOR,
> rsz_step_value(src_chroma_w, dst_w));
> 185 zx_writel(rsz + RSZ_VL_CHROMA_VER,
> rsz_step_value(src_chroma_h, dst_h));
> 186
> 187 zx_vl_rsz_set_update(zplane);
> 188 }
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
