For RK3399, the grf clk should be enabled before writing grf registers,
otherwise the register value can not be changed.

Signed-off-by: Chris Zhong <z...@rock-chips.com>
---

 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c 
b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index f84f9ae..d8f24f2 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -291,6 +291,7 @@ struct dw_mipi_dsi {
        struct regmap *grf_regmap;
        void __iomem *base;
 
+       struct clk *grf_clk;
        struct clk *pllref_clk;
        struct clk *pclk;
        struct clk *phy_cfg_clk;
@@ -979,6 +980,16 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder 
*encoder)
        dw_mipi_dsi_dphy_interface_config(dsi);
        dw_mipi_dsi_clear_err(dsi);
 
+       /*
+        * For the RK3399, the clk of grf must be enabled before writing grf
+        * register.
+        */
+       ret = clk_prepare_enable(dsi->grf_clk);
+       if (ret) {
+               dev_err(dsi->dev, "Failed to enable grf_clk\n");
+               return;
+       }
+
        if (pdata->grf_dsi0_mode_reg)
                regmap_write(dsi->grf_regmap, pdata->grf_dsi0_mode_reg,
                             pdata->grf_dsi0_mode);
@@ -1003,6 +1014,8 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder 
*encoder)
        regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val);
        dev_dbg(dsi->dev, "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG");
        dsi->dpms_mode = DRM_MODE_DPMS_ON;
+
+       clk_disable_unprepare(dsi->grf_clk);
 }
 
 static int
@@ -1238,6 +1251,17 @@ static int dw_mipi_dsi_bind(struct device *dev, struct 
device *master,
                dev_dbg(dev, "have not phy_cfg_clk\n");
        }
 
+       dsi->grf_clk = devm_clk_get(dev, "grf");
+       if (IS_ERR(dsi->grf_clk)) {
+               ret = PTR_ERR(dsi->grf_clk);
+               if (ret != -ENOENT) {
+                       dev_err(dev, "Unable to get grf_clk: %d\n", ret);
+                       return ret;
+               }
+               dsi->grf_clk = NULL;
+               dev_dbg(dev, "have not grf_clk\n");
+       }
+
        ret = clk_prepare_enable(dsi->pllref_clk);
        if (ret) {
                dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
-- 
2.6.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to