For RK3399, the grf clock should be controlled by dw-mipi-dsi driver, add the description for this clock.
Signed-off-by: Chris Zhong <z...@rock-chips.com> --- Changes in v3: None Changes in v2: None .../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index 188f6f7..7e17a60 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -10,7 +10,7 @@ Required properties: - interrupts: Represent the controller's interrupt to the CPU(s). - clocks, clock-names: Phandles to the controller's pll reference clock(ref) and APB clock(pclk). For RK3399, a phy config clock - (phy_cfg) is additional required. As described in [1]. + (phy_cfg) and a grf clock(grf) are additional required. As described in [1]. - rockchip,grf: this soc should set GRF regs to mux vopl/vopb. - ports: contain a port node with endpoint definitions as defined in [2]. For vopb,set the reg = <0> and set the reg = <1> for vopl. -- 2.6.3 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel