On Mon, May 15, 2017 at 12:30:43AM +0800, Icenowy Zheng wrote:
> + de2_clocks: clock@1000000 {
display_clocks would be better there, we don't have to dissociate de1
with de2
> + compatible = "allwinner,sun8i-v3s-de2-clk";
> + reg = <0x01000000 0x100000>;
> + clocks = <&ccu CLK_DE>,
> + <&ccu CLK_BUS_DE>;
> + clock-names = "mod",
> + "bus";
> + resets = <&ccu RST_BUS_DE>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + de2_mixer0: mixer@1100000 {
and mixer0 here is enough too.
Is there several of them? Why not just use mixer if there's only one?
> + compatible = "allwinner,sun8i-v3s-de2-mixer";
> + reg = <0x01100000 0x100000>;
> + clocks = <&de2_clocks CLK_MIXER0>,
> + <&de2_clocks CLK_BUS_MIXER0>;
> + clock-names = "mod",
> + "bus";
> + resets = <&de2_clocks RST_MIXER0>;
> + assigned-clocks = <&de2_clocks CLK_MIXER0>;
> + assigned-clock-rates = <150000000>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mixer0_out: port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + mixer0_out_tcon0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint =
> <&tcon0_in_mixer0>;
> + };
> + };
> + };
> + };
> +
> + tcon0: lcd-controller@1c0c000 {
> + compatible = "allwinner,sun8i-v3s-tcon";
> + reg = <0x01c0c000 0x1000>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_TCON0>,
> + <&ccu CLK_TCON0>;
> + clock-names = "ahb",
> + "tcon-ch0";
> + clock-output-names = "tcon-pixel-clock";
> + resets = <&ccu RST_BUS_TCON0>;
> + reset-names = "lcd";
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tcon0_in: port@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + tcon0_in_mixer0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint =
> <&mixer0_out_tcon0>;
> + };
> + };
> +
> + tcon0_out: port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + };
> + };
> + };
> +
> +
You have an extra new line here.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
