drm_of_find_panel_or_bridge() is expecting np to point to the encoder node, not the bridge or panel this encoder is feeding. Moreover, the endpoint parameter passed to drm_of_find_panel_or_bridge() is always set to zero, which prevents us from probing all outputs.
We also move the atmel_hlcdc_rgb_output allocation after the panel/bridge detection to avoid useless allocations. Reported-by: Alexandre Belloni <alexandre.bell...@free-electrons.com> Fixes: ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") Signed-off-by: Boris Brezillon <boris.brezil...@free-electrons.com> --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 36 +++++++++--------------- 1 file changed, 14 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c index 65a3bd7a0c00..423dda2785d4 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c @@ -152,8 +152,7 @@ static const struct drm_connector_funcs atmel_hlcdc_panel_connector_funcs = { .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, }; -static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, - const struct device_node *np) +static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, int endpoint) { struct atmel_hlcdc_dc *dc = dev->dev_private; struct atmel_hlcdc_rgb_output *output; @@ -161,6 +160,11 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, struct drm_bridge *bridge; int ret; + ret = drm_of_find_panel_or_bridge(dev->dev->of_node, 0, endpoint, + &panel, &bridge); + if (ret) + return ret; + output = devm_kzalloc(dev->dev, sizeof(*output), GFP_KERNEL); if (!output) return -EINVAL; @@ -177,10 +181,6 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, output->encoder.possible_crtcs = 0x1; - ret = drm_of_find_panel_or_bridge(np, 0, 0, &panel, &bridge); - if (ret) - return ret; - if (panel) { output->connector.dpms = DRM_MODE_DPMS_OFF; output->connector.polled = DRM_CONNECTOR_POLL_CONNECT; @@ -220,22 +220,14 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, int atmel_hlcdc_create_outputs(struct drm_device *dev) { - struct device_node *remote; - int ret = -ENODEV; - int endpoint = 0; - - while (true) { - /* Loop thru possible multiple connections to the output */ - remote = of_graph_get_remote_node(dev->dev->of_node, 0, - endpoint++); - if (!remote) - break; - - ret = atmel_hlcdc_attach_endpoint(dev, remote); - of_node_put(remote); - if (ret) - return ret; - } + int endpoint, ret = 0; + + for (endpoint = 0; !ret; endpoint++) + ret = atmel_hlcdc_attach_endpoint(dev, endpoint); + + /* At least one device was successfully attached.*/ + if (ret == -ENODEV && endpoint) + return 0; return ret; } -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel