On Fri, May 12, 2017 at 04:56:28PM +0200, Philippe CORNU wrote:
> This patch adds documentation of device tree bindings for the STM32
> DSI host driver based on the Synopsys DW MIPI DSI driver from Rockchip.
>
> Signed-off-by: Philippe CORNU <philippe.co...@st.com>
> ---
> .../devicetree/bindings/display/st,stm32-ltdc.txt | 92
> +++++++++++++++++++++-
> 1 file changed, 90 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> index 8e14769..a61381b 100644
> --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> @@ -1,7 +1,6 @@
> * STMicroelectronics STM32 lcd-tft display controller
>
> - ltdc: lcd-tft display controller host
> - must be a sub-node of st-display-subsystem
Why is this removed? The "must" refers to the location, not whether
present or not if that's what you were trying to change.
> Required properties:
> - compatible: "st,stm32-ltdc"
> - reg: Physical base address of the IP registers and length of memory
> mapped region.
> @@ -13,8 +12,25 @@
> Required nodes:
> - Video port for RGB output.
>
> -Example:
> +* STMicroelectronics STM32 specific extensions to Synopsys Designware MIPI
> DSI
> +(similar to "rockchip/dw_mipi_dsi_rockchip.txt")
>
> +Required properties:
> +- #address-cells: Should be <1>.
> +- #size-cells: Should be <0>.
> +- compatible: "st,stm32-dsi_host".
Don't use '_' and this needs to be more specific than just "stm32".
> +- reg: Represent the physical address range of the controller.
> +- clocks, clock-names: Phandles to the controller's pll reference
> + clock(ref) and APB clock(pclk). As described in [1].
Ideally these should be in a common binding (like the driver) as a given
IP block doesn't have a varying number of clocks (typically).
> +- ports: contain a port node with endpoint definitions as defined in [2].
a single port? Need to be clear how many ports/endpoints and their
function.
> +- resets: list of phandle + reset specifier pairs, as described in [3].
> +- reset-names: string reset name, must be "apb".
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/media/video-interfaces.txt
> +[3] Documentation/devicetree/bindings/reset/reset.txt
> +
> +Example 1: RGB panel
> / {
> ...
> soc {
> @@ -34,3 +50,75 @@ Example:
> };
> };
> };
> +
> +Example 2: DSI panel
> +
> +/ {
> + ...
> + soc {
> + ...
> + ltdc: display-controller@40016800 {
> + compatible = "st,stm32-ltdc";
> + reg = <0x40016800 0x200>;
> + interrupts = <88>, <89>;
> + resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
> + clocks = <&rcc 1 CLK_LCD>;
> + clock-names = "lcd";
> +
> + port {
> + ltdc_out_dsi_host: endpoint {
> + remote-endpoint = <&dsi_host_in>;
> + };
> + };
> + };
> +
> +
> + dsi_host: dsi_host@40016C00 {
dsi@...
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-dsi_host";
> + reg = <0x40016C00 0x800>;
> + clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
> + clock-names = "ref", "pclk";
> + resets = <&rcc STM32F4_APB2_RESET(DSI)>;
> + reset-names = "apb";
> + status = "okay";
Don't show status in examples.
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dsi_host_in: endpoint {
> + remote-endpoint =
> <<dc_out_dsi_host>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dsi_host_out_panel: endpoint {
> + remote-endpoint =
> <&dsi_host_in_panel>;
> + };
> + };
> +
> + };
> +
> + panel-dsi@0 {
> + reg = <0>; /* dsi virtual channel (0..3) */
> + compatible = ...;
> + enable-gpios = ...;
> + status = "okay";
> +
> + port {
> + dsi_host_in_panel: endpoint {
> + remote-endpoint =
> <&dsi_host_out_panel>;
> + };
> + };
> +
> + };
> +
> + };
> +
> + };
> +};
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
