On 05/25/2017 04:19 PM, Jose Abreu wrote:
> This changes the connector probe helper function to use the new
> encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid()
> helper callbacks to validate the modes.
>
> The new callbacks are optional so the behaviour remains the same
> if they are not implemented. If they are, then the code loops
> through all the connector's encodersXbridgesXcrtcs and calls the
> callback.
>
> If at least a valid encoderXbridgeXcrtc combination is found which
> accepts the mode then the function returns MODE_OK.
>
> Signed-off-by: Jose Abreu <joab...@synopsys.com>
> Reviewed-by: Daniel Vetter <daniel.vet...@ffwll.ch>
> Cc: Carlos Palminha <palmi...@synopsys.com>
> Cc: Dave Airlie <airl...@linux.ie>
> Cc: Andrzej Hajda <a.ha...@samsung.com>
> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
>
> Changes v3->v4:
> - Change function name (Laurent)
> Changes v2->v3:
> - Call also bridge->mode_valid (Daniel)
> Changes v1->v2:
> - Use new helpers suggested by Ville
> - Change documentation (Daniel)
>
> ---
> drivers/gpu/drm/drm_probe_helper.c | 67
> +++++++++++++++++++++++++++++++++++---
> 1 file changed, 63 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_probe_helper.c
> b/drivers/gpu/drm/drm_probe_helper.c
> index f01abdc..00e6832 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -83,6 +83,61 @@
> return MODE_OK;
> }
>
> +static enum drm_mode_status
> +drm_mode_validate_pipeline(struct drm_display_mode *mode,
> + struct drm_connector *connector)
> +{
> + struct drm_device *dev = connector->dev;
> + uint32_t *ids = connector->encoder_ids;
> + enum drm_mode_status ret = MODE_OK;
> + unsigned int i;
> +
> + /* Step 1: Validate against connector */
> + ret = drm_connector_mode_valid(connector, mode);
> + if (ret != MODE_OK)
> + return ret;
> +
> + /* Step 2: Validate against encoders and crtcs */
> + for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
> + struct drm_encoder *encoder = drm_encoder_find(dev, ids[i]);
> + struct drm_crtc *crtc;
> +
> + if (!encoder)
> + continue;
> +
> + ret = drm_encoder_mode_valid(encoder, mode);
> + if (ret != MODE_OK) {
> + /* No point in continuing for crtc check as this encoder
> + * will not accept the mode anyway. If all encoders
> + * reject the mode then, at exit, ret will not be
> + * MODE_OK. */
> + continue;
> + }
> +
> + ret = drm_bridge_mode_valid(encoder->bridge, mode);
> + if (ret != MODE_OK) {
> + /* There is also no point in continuing for crtc check
> + * here. */
> + continue;
> + }
> +
> + drm_for_each_crtc(crtc, dev) {
> + if (!drm_encoder_crtc_ok(encoder, crtc))
> + continue;
> +
> + ret = drm_crtc_mode_valid(crtc, mode);
> + if (ret == MODE_OK) {
> + /* If we get to this point there is at least
> + * one combination of encoder+crtc that works
> + * for this mode. Lets return now. */
> + return ret;
> + }
> + }
> + }
> +
> + return ret;
> +}
> +
> static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
> {
> struct drm_cmdline_mode *cmdline_mode;
> @@ -322,7 +377,11 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
> * - drm_mode_validate_flag() checks the modes against basic connector
> * capabilities (interlace_allowed,doublescan_allowed,stereo_allowed)
> * - the optional &drm_connector_helper_funcs.mode_valid helper can
> perform
> - * driver and/or hardware specific checks
> + * driver and/or sink specific checks
> + * - the optional &drm_crtc_helper_funcs.mode_valid,
> + * &drm_bridge_funcs.mode_valid and &drm_encoder_helper_funcs.mode_valid
> + * helpers can perform driver and/or source specific checks which are
> also
> + * enforced by the modeset/atomic helpers
> *
> * 5. Any mode whose status is not OK is pruned from the connector's modes
> list,
> * accompanied by a debug message indicating the reason for the mode's
> @@ -466,9 +525,9 @@ int drm_helper_probe_single_connector_modes(struct
> drm_connector *connector,
> if (mode->status == MODE_OK)
> mode->status = drm_mode_validate_flag(mode, mode_flags);
>
> - if (mode->status == MODE_OK && connector_funcs->mode_valid)
> - mode->status = connector_funcs->mode_valid(connector,
> - mode);
> + if (mode->status == MODE_OK)
> + mode->status = drm_mode_validate_pipeline(mode,
> + connector);
> }
>
> prune:
>
Reviewed-by: Neil Armstrong <narmstr...@baylibre.com>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
