The redundant fb helper .load_lut is no longer used, and can not
work right without also providing the fb helpers .gamma_set and
.gamma_get thus rendering the code in this driver suspect.

Just remove the dead code.

Signed-off-by: Peter Rosin <p...@axentia.se>
---
 drivers/gpu/drm/stm/ltdc.c | 12 ------------
 drivers/gpu/drm/stm/ltdc.h |  1 -
 2 files changed, 13 deletions(-)

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 1b9483d..87829b9 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -375,17 +375,6 @@ static irqreturn_t ltdc_irq(int irq, void *arg)
  * DRM_CRTC
  */
 
-static void ltdc_crtc_load_lut(struct drm_crtc *crtc)
-{
-       struct ltdc_device *ldev = crtc_to_ltdc(crtc);
-       unsigned int i, lay;
-
-       for (lay = 0; lay < ldev->caps.nb_layers; lay++)
-               for (i = 0; i < 256; i++)
-                       reg_write(ldev->regs, LTDC_L1CLUTWR + lay * LAY_OFS,
-                                 ldev->clut[i]);
-}
-
 static void ltdc_crtc_enable(struct drm_crtc *crtc)
 {
        struct ltdc_device *ldev = crtc_to_ltdc(crtc);
@@ -523,7 +512,6 @@ static void ltdc_crtc_atomic_flush(struct drm_crtc *crtc,
 }
 
 static struct drm_crtc_helper_funcs ltdc_crtc_helper_funcs = {
-       .load_lut = ltdc_crtc_load_lut,
        .enable = ltdc_crtc_enable,
        .disable = ltdc_crtc_disable,
        .mode_set_nofb = ltdc_crtc_mode_set_nofb,
diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
index d7a9c73..620ca55 100644
--- a/drivers/gpu/drm/stm/ltdc.h
+++ b/drivers/gpu/drm/stm/ltdc.h
@@ -27,7 +27,6 @@ struct ltdc_device {
        struct drm_panel *panel;
        struct mutex err_lock;  /* protecting error_status */
        struct ltdc_caps caps;
-       u32 clut[256];          /* color look up table */
        u32 error_status;
        u32 irq_status;
 };
-- 
2.1.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to