From: Russell King <rmk+ker...@armlinux.org.uk>

Add CEC notifier support to the HDMI bridge driver, so that the CEC
part of the IP can receive its physical address.

Tested-by: Neil Armstrong <narmstr...@baylibre.com>
Acked-by: Neil Armstrong <narmstr...@baylibre.com>
Acked-by: Hans Verkuil <hans.verk...@cisco.com>
Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
[narmstrong: added kconfig tweak to get the right modules dependencies]
Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
 drivers/gpu/drm/bridge/synopsys/Kconfig   |  1 +
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 18 ++++++++++++++++++
 2 files changed, 19 insertions(+)

Hi Archit, Hans,

This is second repost of Russell's patch from his dw-hdmi CEC patchset.

Latest russell's thread :
https://lkml.kernel.org/r/e1dfi3e-0004lh...@rmk-pc.armlinux.org.uk

Previous repost :
https://lkml.kernel.org/r/1499337186-24429-1-git-send-email-narmstr...@baylibre.com

It includes the Kconfig tweak to ensure the correct modules dependencies.

Neil

diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig 
b/drivers/gpu/drm/bridge/synopsys/Kconfig
index 53e78d0..351db00 100644
--- a/drivers/gpu/drm/bridge/synopsys/Kconfig
+++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
@@ -2,6 +2,7 @@ config DRM_DW_HDMI
        tristate
        select DRM_KMS_HELPER
        select REGMAP_MMIO
+       select CEC_CORE if CEC_NOTIFIER
 
 config DRM_DW_HDMI_AHB_AUDIO
        tristate "Synopsys Designware AHB Audio interface"
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c 
b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index ead1124..9c03846 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -33,6 +33,8 @@
 #include <uapi/linux/media-bus-format.h>
 #include <uapi/linux/videodev2.h>
 
+#include <media/cec-notifier.h>
+
 #include "dw-hdmi.h"
 #include "dw-hdmi-audio.h"
 
@@ -175,6 +177,8 @@ struct dw_hdmi {
        struct regmap *regm;
        void (*enable_audio)(struct dw_hdmi *hdmi);
        void (*disable_audio)(struct dw_hdmi *hdmi);
+
+       struct cec_notifier *cec_notifier;
 };
 
 #define HDMI_IH_PHY_STAT0_RX_SENSE \
@@ -1896,6 +1900,7 @@ static int dw_hdmi_connector_get_modes(struct 
drm_connector *connector)
                hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
                hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
                drm_mode_connector_update_edid_property(connector, edid);
+               cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
                ret = drm_add_edid_modes(connector, edid);
                /* Store the ELD */
                drm_edid_to_eld(connector, edid);
@@ -2077,6 +2082,10 @@ void __dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool 
hpd, bool rx_sense)
                dw_hdmi_update_phy_mask(hdmi);
        }
        mutex_unlock(&hdmi->mutex);
+
+       if (!rx_sense && !hpd)
+               cec_notifier_set_phys_addr(hdmi->cec_notifier,
+                                          CEC_PHYS_ADDR_INVALID);
 }
 
 void dw_hdmi_setup_rx_sense(struct device *dev, bool hpd, bool rx_sense)
@@ -2376,6 +2385,12 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
        if (ret)
                goto err_iahb;
 
+       hdmi->cec_notifier = cec_notifier_get(dev);
+       if (!hdmi->cec_notifier) {
+               ret = -ENOMEM;
+               goto err_iahb;
+       }
+
        /*
         * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
         * N and cts values before enabling phy
@@ -2452,6 +2467,9 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
                hdmi->ddc = NULL;
        }
 
+       if (hdmi->cec_notifier)
+               cec_notifier_put(hdmi->cec_notifier);
+
        clk_disable_unprepare(hdmi->iahb_clk);
 err_isfr:
        clk_disable_unprepare(hdmi->isfr_clk);
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to