Hi Russell,
Just two small comments below.
After that's fixed you can add my:
Acked-by: Hans Verkuil <hans.verk...@cisco.com>
and:
Tested-by: Hans Verkuil <hans.verk...@cisco.com>
(on my SolidRun Cubox-i).
On 07/31/2017 04:29 PM, Russell King wrote:
> Add a CEC driver for the dw-hdmi hardware.
>
> Reviewed-by: Neil Armstrong <narmstr...@baylibre.com>
> Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
> ---
> drivers/gpu/drm/bridge/synopsys/Kconfig | 9 +
> drivers/gpu/drm/bridge/synopsys/Makefile | 1 +
> drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c | 326
> ++++++++++++++++++++++++++
> drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.h | 19 ++
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 42 +++-
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 1 +
> 6 files changed, 397 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
> create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.h
>
<snip>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
> new file mode 100644
> index 000000000000..52c9d93b9602
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
> @@ -0,0 +1,326 @@
<snip>
> +static irqreturn_t dw_hdmi_cec_thread(int irq, void *data)
> +{
> + struct cec_adapter *adap = data;
> + struct dw_hdmi_cec *cec = cec_get_drvdata(adap);
> +
> + if (cec->tx_done) {
> + cec->tx_done = false;
> + cec_transmit_done(adap, cec->tx_status, 0, 0, 0, 0);
Replace by:
cec_transmit_attempt_done(adap, cec->tx_status);
This gets the counters right.
> + }
> + if (cec->rx_done) {
> + cec->rx_done = false;
> + smp_rmb();
> + cec_received_msg(adap, &cec->rx_msg);
> + }
> + return IRQ_HANDLED;
> +}
> +
> +static int dw_hdmi_cec_probe(struct platform_device *pdev)
> +{
> + struct dw_hdmi_cec_data *data = dev_get_platdata(&pdev->dev);
> + struct dw_hdmi_cec *cec;
> + int ret;
> +
> + if (!data)
> + return -ENXIO;
> +
> + /*
> + * Our device is just a convenience - we want to link to the real
> + * hardware device here, so that userspace can see the association
> + * between the HDMI hardware and its associated CEC chardev.
> + */
> + cec = devm_kzalloc(&pdev->dev, sizeof(*cec), GFP_KERNEL);
> + if (!cec)
> + return -ENOMEM;
> +
> + cec->irq = data->irq;
> + cec->ops = data->ops;
> + cec->hdmi = data->hdmi;
> +
> + platform_set_drvdata(pdev, cec);
> +
> + dw_hdmi_write(cec, 0, HDMI_CEC_TX_CNT);
> + dw_hdmi_write(cec, ~0, HDMI_CEC_MASK);
> + dw_hdmi_write(cec, ~0, HDMI_IH_MUTE_CEC_STAT0);
> + dw_hdmi_write(cec, 0, HDMI_CEC_POLARITY);
> +
> + cec->adap = cec_allocate_adapter(&dw_hdmi_cec_ops, cec, "dw_hdmi",
> + CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT |
> + CEC_CAP_RC, CEC_MAX_LOG_ADDRS);
Add the missing CEC_CAP_PASSTHROUGH capability.
I think I am going to add a new define to media/cec.h:
#define CEC_CAP_DEFAULTS (CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT | \
CEC_CAP_PASSTHROUGH | CEC_CAP_RC)
to simplify this since these are standard capabilities.
But that's something I'll do later. For now just add CEC_CAP_PASSTHROUGH.
> + if (IS_ERR(cec->adap))
> + return PTR_ERR(cec->adap);
> +
> + /* override the module pointer */
> + cec->adap->owner = THIS_MODULE;
> +
> + ret = devm_add_action(&pdev->dev, dw_hdmi_cec_del, cec);
> + if (ret) {
> + cec_delete_adapter(cec->adap);
> + return ret;
> + }
> +
> + ret = devm_request_threaded_irq(&pdev->dev, cec->irq,
> + dw_hdmi_cec_hardirq,
> + dw_hdmi_cec_thread, IRQF_SHARED,
> + "dw-hdmi-cec", cec->adap);
> + if (ret < 0)
> + return ret;
> +
> + cec->notify = cec_notifier_get(pdev->dev.parent);
> + if (!cec->notify)
> + return -ENOMEM;
> +
> + ret = cec_register_adapter(cec->adap, pdev->dev.parent);
> + if (ret < 0) {
> + cec_notifier_put(cec->notify);
> + return ret;
> + }
> +
> + /*
> + * CEC documentation says we must not call cec_delete_adapter
> + * after a successful call to cec_register_adapter().
> + */
> + devm_remove_action(&pdev->dev, dw_hdmi_cec_del, cec);
> +
> + cec_register_cec_notifier(cec->adap, cec->notify);
> +
> + return 0;
> +}
<snip>
Thank you for writing this driver!
Hans
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
