Status update:
In r600.c I found for RS780, num_*_threads are like this:
sq_thread_resource_mgmt = (NUM_PS_THREADS(79) |
NUM_VS_THREADS(78) |
NUM_GS_THREADS(4) |
NUM_ES_THREADS(31));
But in documents, each of them should be a multiple of 4. And in
r600_blit_kms.c， they are 136, 48, 4, 4. I want to know why
79, 78, 4 and 31 are use here.
Huacai Chen
> On Wed, 2012-02-29 at 12:49 +0800, che...@lemote.com wrote:
>> > On Tue, 2012-02-21 at 18:37 +0800, Chen Jie wrote:
>> >> 在 2012年2月17日 下午5:27，Chen Jie <ch...@lemote.com> 写道：
>> >> >> One good way to test gart is to go over GPU gart table and write a
>> >> >> dword using the GPU at end of each page something like 0xCAFEDEAD
>> >> >> or somevalue that is unlikely to be already set. And then go over
>> >> >> all the page and check that GPU write succeed. Abusing the scratch
>> >> >> register write back feature is the easiest way to try that.
>> >> > I'm planning to add a GART table check procedure when resume, which
>> >> > will go over GPU gart table:
>> >> > 1. read(backup) a dword at end of each GPU page
>> >> > 2. write a mark by GPU and check it
>> >> > 3. restore the original dword
>> >> Attachment validateGART.patch do the job:
>> >> * It current only works for mips64 platform.
>> >> * To use it, apply all_in_vram.patch first, which will allocate CP
>> >> ring, ih, ib in VRAM and hard code no_wb=1.
>> >>
>> >> The gart test routine will be invoked in r600_resume. We've tried it,
>> >> and find that when lockup happened the gart table was good before
>> >> userspace restarting. The related dmesg follows:
>> >> [ 1521.820312] [drm] r600_gart_table_validate(): Validate GART Table
>> >> at 9000000040040000, 32768 entries, Dummy
>> >> Page[0x000000000e004000-0x000000000e007fff]
>> >> [ 1522.019531] [drm] r600_gart_table_validate(): Sweep 32768
>> >> entries(valid=8544, invalid=24224, total=32768).
>> >> ...
>> >> [ 1531.156250] PM: resume of devices complete after 9396.588 msecs
>> >> [ 1532.152343] Restarting tasks ... done.
>> >> [ 1544.468750] radeon 0000:01:05.0: GPU lockup CP stall for more than
>> >> 10003msec
>> >> [ 1544.472656] ------------[ cut here ]------------
>> >> [ 1544.480468] WARNING: at drivers/gpu/drm/radeon/radeon_fence.c:243
>> >> radeon_fence_wait+0x25c/0x314()
>> >> [ 1544.488281] GPU lockup (waiting for 0x0002136B last fence id
>> >> 0x0002136A)
>> >> ...
>> >> [ 1544.886718] radeon 0000:01:05.0: Wait for MC idle timedout !
>> >> [ 1545.046875] radeon 0000:01:05.0: Wait for MC idle timedout !
>> >> [ 1545.062500] radeon 0000:01:05.0: WB disabled
>> >> [ 1545.097656] [drm] ring test succeeded in 0 usecs
>> >> [ 1545.105468] [drm] ib test succeeded in 0 usecs
>> >> [ 1545.109375] [drm] Enabling audio support
>> >> [ 1545.113281] [drm] r600_gart_table_validate(): Validate GART Table
>> >> at 9000000040040000, 32768 entries, Dummy
>> >> Page[0x000000000e004000-0x000000000e007fff]
>> >> [ 1545.125000] [drm:r600_gart_table_validate] *ERROR* Iter=0:
>> >> unexpected value 0x745aaad1(expect 0xDEADBEEF)
>> >> entry=0x000000000e008067, orignal=0x745aaad1
>> >> ...
>> >> /* System blocked here. */
>> >>
>> >> Any idea?
>> >
>> > I know lockup are frustrating, my only idea is the memory controller
>> > is lockup because of some failing pci <-> system ram transaction.
>> >
>> >>
>> >> BTW, we find the following in r600_pcie_gart_enable()
>> >> (drivers/gpu/drm/radeon/r600.c):
>> >> WREG32(VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR,
>> >> (u32)(rdev->dummy_page.addr >> 12));
>> >>
>> >> On our platform, PAGE_SIZE is 16K, does it have any problem?
>> >
>> > No this should be handled properly.
>> >
>> >> Also in radeon_gart_unbind() and radeon_gart_restore(), the logic
>> >> should change to:
>> >> for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
>> >> radeon_gart_set_page(rdev, t, page_base);
>> >> - page_base += RADEON_GPU_PAGE_SIZE;
>> >> + if (page_base != rdev->dummy_page.addr)
>> >> + page_base += RADEON_GPU_PAGE_SIZE;
>> >> }
>> >> ???
>> >
>> > No need to do so, dummy page will be 16K too, so it's fine.
>> Really? When CPU page is 16K and GPU page is 4k, suppose the dummy page
>> is 0x8e004000, then there are four types of address in GART:0x8e004000,
>> 0x8e005000, 0x8e006000, 0x8e007000. The value which written in
>> VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR is 0x8e004 (0x8e004000<<12). I
>> don't know how VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR works, but I
>> think 0x8e005000, 0x8e006000 and 0x8e007000 cannot be handled correctly.
>
> When radeon_gart_unbind initialize the gart entry to point to the dummy
> page it's just to have something safe in the GART table.
>
> VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR is the page address used when
> there is a fault happening. It's like a sandbox for the mc. It doesn't
> conflict in anyway to have gart table entry to point to same page.
>
> Cheers,
> Jerome
>
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
