Hi Kieran, On Monday, 18 September 2017 03:04:13 EEST Kieran Bingham wrote: > On 15/09/17 17:58, Laurent Pinchart wrote: > > On Friday, 15 September 2017 19:42:05 EEST Kieran Bingham wrote: > >> DRM pipelines utilising the VSP must stop all frame processing as part > >> of the suspend operation to ensure the hardware is idle. Upon resume, > >> the pipeline must not be started until the DU performs an atomic flush > >> to restore the hardware configuration and state. > >> > >> Therefore the vsp1_pipeline_resume() call is not needed for DRM > >> pipelines, and we can disable it in this instance. > > > > Being familiar with the issue I certainly understand the commit message, > > but I think it can be a bit confusing to a reader not familiar to the > > VSP/DU. How about something similar to the following ? > > > > "When used as part of a display pipeline, the VSP is stopped and restarted > > explicitly by the DU from its suspend and resume handlers. There is thus > > no need to stop or restart pipelines in the VSP suspend and resume > > handlers." > > That's fine with me. > > >> CC: linux-me...@vger.kernel.org > >> > >> Signed-off-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com> > >> --- > >> > >> drivers/media/platform/vsp1/vsp1_drv.c | 8 +++++++- > >> 1 file changed, 7 insertions(+), 1 deletion(-) > >> > >> diff --git a/drivers/media/platform/vsp1/vsp1_drv.c > >> b/drivers/media/platform/vsp1/vsp1_drv.c index 962e4c304076..7604c7994c74 > >> 100644 > >> --- a/drivers/media/platform/vsp1/vsp1_drv.c > >> +++ b/drivers/media/platform/vsp1/vsp1_drv.c > >> @@ -582,7 +582,13 @@ static int __maybe_unused vsp1_pm_resume(struct > >> device > >> *dev) struct vsp1_device *vsp1 = dev_get_drvdata(dev); > >> > >> pm_runtime_force_resume(vsp1->dev); > >> > >> - vsp1_pipelines_resume(vsp1); > >> + > >> + /* > >> + * DRM pipelines are stopped before suspend, and will be resumed after > >> + * the DRM subsystem has reconfigured its pipeline with an atomic flush > >> + */ > > > > I would also adapt this comment similarly to the commit message. > > > >> + if (!vsp1->drm) > >> + vsp1_pipelines_resume(vsp1); > > > > Should we do the same in vsp1_pm_suspend() ? I know it shouldn't be > > strictly needed at the moment as vsp1_pipelines_suspend() should be a > > no-op when the pipelines are already stopped, but a symmetrical > > implementation sounds better to me. > > I'm OK with that, it's not needed - but it doesn't hurt to be symmetrical. > > (Updated locally for a v1.1 repost or such)
I've taken patches 2/3 and 3/3 in my tree so feel free to report 1/3 only. > > I also wonder whether the check shouldn't be moved inside the > > vsp1_pipelines_suspend() and vsp1_pipelines_resume() functions as we will > > likely need to handle suspend/resume of display pipelines when adding > > writeback support, but we could do so later. > > I'll have to retest the writeback implementation - but I think that has got > quite stale now anyway and will need some rework. Agreed, I don't expect it to work out of the box. We can move the check later when rebasing the writeback patches. > >> return 0; > >> > >> } -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel