tree: git://anongit.freedesktop.org/drm/drm-tip drm-tip
head: 36e0e803d3d7fb3d74e9086ad7c749123661589e
commit: 939d749ad6649c4123daf63a8bc053ea97ad2218 [899/925] drm/sun4i: hdmi: Add
support for controller hardware variants
config: arm-defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
wget
https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O
~/bin/make.cross
chmod +x ~/bin/make.cross
git checkout 939d749ad6649c4123daf63a8bc053ea97ad2218
# save the attached .config to linux build tree
make.cross ARCH=arm
Note: the drm-tip/drm-tip HEAD 36e0e803d3d7fb3d74e9086ad7c749123661589e builds
fine.
It only hurts bisectibility.
All error/warnings (new ones prefixed by >>):
drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c: In function 'fifo_transfer':
>> drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c:54:6: error: implicit declaration of
>> function 'regmap_field_read_poll_timeout'
>> [-Werror=implicit-function-declaration]
if (regmap_field_read_poll_timeout(hdmi->field_ddc_int_status, reg,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c:54:6: warning: 'reg' is used
>> uninitialized in this function [-Wuninitialized]
if (regmap_field_read_poll_timeout(hdmi->field_ddc_int_status, reg,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
reg & mask, len * byte_time_ns,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
100000))
~~~~~~~
drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c: In function 'sun4i_hdmi_i2c_xfer':
>> drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c:171:6: warning: 'reg' may be used
>> uninitialized in this function [-Wmaybe-uninitialized]
if (regmap_field_read_poll_timeout(hdmi->field_ddc_reset,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
reg, !reg, 100, 2000)) {
~~~~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
vim +/regmap_field_read_poll_timeout +54 drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c
28
29 static int fifo_transfer(struct sun4i_hdmi *hdmi, u8 *buf, int len,
bool read)
30 {
31 /*
32 * 1 byte takes 9 clock cycles (8 bits + 1 ACK) = 90 us for 100
kHz
33 * clock. As clock rate is fixed, just round it up to 100 us.
34 */
35 const unsigned long byte_time_ns = 100;
36 const u32 mask = SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK |
37 SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST |
38 SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE;
39 u32 reg;
40 /*
41 * If threshold is inclusive, then the FIFO may only have
42 * RX_THRESHOLD number of bytes, instead of RX_THRESHOLD + 1.
43 */
44 int read_len = RX_THRESHOLD +
45 (hdmi->variant->ddc_fifo_thres_incl ? 0 : 1);
46
47 /*
48 * Limit transfer length by FIFO threshold or FIFO size.
49 * For TX the threshold is for an empty FIFO.
50 */
51 len = min_t(int, len, read ? read_len :
SUN4I_HDMI_DDC_FIFO_SIZE);
52
53 /* Wait until error, FIFO request bit set or transfer complete
*/
> 54 if (regmap_field_read_poll_timeout(hdmi->field_ddc_int_status,
reg,
55 reg & mask, len *
byte_time_ns,
56 100000))
57 return -ETIMEDOUT;
58
59 if (reg & SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK)
60 return -EIO;
61
62 if (read)
63 readsb(hdmi->base + hdmi->variant->ddc_fifo_reg, buf,
len);
64 else
65 writesb(hdmi->base + hdmi->variant->ddc_fifo_reg, buf,
len);
66
67 /* Clear FIFO request bit by forcing a write to that bit */
68 regmap_field_force_write(hdmi->field_ddc_int_status,
69
SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST);
70
71 return len;
72 }
73
74 static int xfer_msg(struct sun4i_hdmi *hdmi, struct i2c_msg *msg)
75 {
76 int i, len;
77 u32 reg;
78
79 /* Set FIFO direction */
80 if (hdmi->variant->ddc_fifo_has_dir) {
81 reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
82 reg &= ~SUN4I_HDMI_DDC_CTRL_FIFO_DIR_MASK;
83 reg |= (msg->flags & I2C_M_RD) ?
84 SUN4I_HDMI_DDC_CTRL_FIFO_DIR_READ :
85 SUN4I_HDMI_DDC_CTRL_FIFO_DIR_WRITE;
86 writel(reg, hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
87 }
88
89 /* Clear address register (not cleared by soft reset) */
90 regmap_field_write(hdmi->field_ddc_addr_reg, 0);
91
92 /* Set I2C address */
93 regmap_field_write(hdmi->field_ddc_slave_addr, msg->addr);
94
95 /*
96 * Set FIFO RX/TX thresholds and clear FIFO
97 *
98 * If threshold is inclusive, we can set the TX threshold to
99 * 0 instead of 1.
100 */
101 regmap_field_write(hdmi->field_ddc_fifo_tx_thres,
102 hdmi->variant->ddc_fifo_thres_incl ? 0 : 1);
103 regmap_field_write(hdmi->field_ddc_fifo_rx_thres, RX_THRESHOLD);
104 regmap_field_write(hdmi->field_ddc_fifo_clear, 1);
105 if (regmap_field_read_poll_timeout(hdmi->field_ddc_fifo_clear,
106 reg, !reg, 100, 2000))
107 return -EIO;
108
109 /* Set transfer length */
110 regmap_field_write(hdmi->field_ddc_byte_count, msg->len);
111
112 /* Set command */
113 regmap_field_write(hdmi->field_ddc_cmd,
114 msg->flags & I2C_M_RD ?
115 SUN4I_HDMI_DDC_CMD_IMPLICIT_READ :
116 SUN4I_HDMI_DDC_CMD_IMPLICIT_WRITE);
117
118 /* Clear interrupt status bits by forcing a write */
119 regmap_field_force_write(hdmi->field_ddc_int_status,
120 SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK |
121 SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST
|
122
SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE);
123
124 /* Start command */
125 regmap_field_write(hdmi->field_ddc_start, 1);
126
127 /* Transfer bytes */
128 for (i = 0; i < msg->len; i += len) {
129 len = fifo_transfer(hdmi, msg->buf + i, msg->len - i,
130 msg->flags & I2C_M_RD);
131 if (len <= 0)
132 return len;
133 }
134
135 /* Wait for command to finish */
136 if (regmap_field_read_poll_timeout(hdmi->field_ddc_start,
137 reg, !reg, 100, 100000))
138 return -EIO;
139
140 /* Check for errors */
141 regmap_field_read(hdmi->field_ddc_int_status, ®);
142 if ((reg & SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK) ||
143 !(reg & SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE)) {
144 return -EIO;
145 }
146
147 return 0;
148 }
149
150 static int sun4i_hdmi_i2c_xfer(struct i2c_adapter *adap,
151 struct i2c_msg *msgs, int num)
152 {
153 struct sun4i_hdmi *hdmi = i2c_get_adapdata(adap);
154 u32 reg;
155 int err, i, ret = num;
156
157 for (i = 0; i < num; i++) {
158 if (!msgs[i].len)
159 return -EINVAL;
160 if (msgs[i].len > SUN4I_HDMI_DDC_BYTE_COUNT_MAX)
161 return -EINVAL;
162 }
163
164 /* DDC clock needs to be enabled for the module to work */
165 clk_prepare_enable(hdmi->ddc_clk);
166 clk_set_rate(hdmi->ddc_clk, 100000);
167
168 /* Reset I2C controller */
169 regmap_field_write(hdmi->field_ddc_en, 1);
170 regmap_field_write(hdmi->field_ddc_reset, 1);
> 171 if (regmap_field_read_poll_timeout(hdmi->field_ddc_reset,
172 reg, !reg, 100, 2000)) {
173 clk_disable_unprepare(hdmi->ddc_clk);
174 return -EIO;
175 }
176
177 regmap_field_write(hdmi->field_ddc_sck_en, 1);
178 regmap_field_write(hdmi->field_ddc_sda_en, 1);
179
180 for (i = 0; i < num; i++) {
181 err = xfer_msg(hdmi, &msgs[i]);
182 if (err) {
183 ret = err;
184 break;
185 }
186 }
187
188 clk_disable_unprepare(hdmi->ddc_clk);
189 return ret;
190 }
191
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
.config.gz
Description: application/gzip
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
