On Fri, 13 Oct 2017 17:12:55 -0700
Eric Anholt <e...@anholt.net> wrote:
> VC4's DSI1 has a bug where the AXI connection is broken for 32-bit
> writes from the CPU, so we use the DMA engine to DMA 32-bit values
> into registers instead. That sleeps, so we can't do it from the top
> half.
>
> As a solution, use an interrupt thread so that all our writes happen
> when sleeping is is allowed.
>
> v2: Use IRQF_ONESHOT (suggested by Boris)
>
> Signed-off-by: Eric Anholt <e...@anholt.net>
Reviewed-by: Boris Brezillon <boris.brezil...@free-electrons.com>
> ---
>
> Boris, that cleanup ended up working and it looks great. Thanks!
>
> drivers/gpu/drm/vc4/vc4_dsi.c | 31 +++++++++++++++++++++++++++++--
> 1 file changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
> index 554605af344e..3b74fda5662d 100644
> --- a/drivers/gpu/drm/vc4/vc4_dsi.c
> +++ b/drivers/gpu/drm/vc4/vc4_dsi.c
> @@ -1360,6 +1360,25 @@ static void dsi_handle_error(struct vc4_dsi *dsi,
> *ret = IRQ_HANDLED;
> }
>
> +/* Initial handler for port 1 where we need the reg_dma workaround.
> + * The register DMA writes sleep, so we can't do it in the top half.
> + * Instead we use IRQF_ONESHOT so that the IRQ gets disabled in the
> + * parent interrupt contrller until our interrupt thread is done.
> + */
> +static irqreturn_t vc4_dsi_irq_defer_to_thread_handler(int irq, void *data)
> +{
> + struct vc4_dsi *dsi = data;
> + u32 stat = DSI_PORT_READ(INT_STAT);
> +
> + if (!stat)
> + return IRQ_NONE;
> +
> + return IRQ_WAKE_THREAD;
> +}
> +
> +/* Normal IRQ handler for port 0, or the threaded IRQ handler for port
> + * 1 where we need the reg_dma workaround.
> + */
> static irqreturn_t vc4_dsi_irq_handler(int irq, void *data)
> {
> struct vc4_dsi *dsi = data;
> @@ -1539,8 +1558,16 @@ static int vc4_dsi_bind(struct device *dev, struct
> device *master, void *data)
> /* Clear any existing interrupt state. */
> DSI_PORT_WRITE(INT_STAT, DSI_PORT_READ(INT_STAT));
>
> - ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
> - vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
> + if (dsi->reg_dma_mem) {
> + ret = devm_request_threaded_irq(dev, platform_get_irq(pdev, 0),
> +
> vc4_dsi_irq_defer_to_thread_handler,
> + vc4_dsi_irq_handler,
> + IRQF_ONESHOT,
> + "vc4 dsi", dsi);
> + } else {
> + ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
> + vc4_dsi_irq_handler, 0, "vc4 dsi", dsi);
> + }
> if (ret) {
> if (ret != -EPROBE_DEFER)
> dev_err(dev, "Failed to get interrupt: %d\n", ret);
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
