The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
.../devicetree/bindings/display/panel/innolux,p079zca.txt | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git
a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
index d0f5516..8cadd8c 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
@@ -1,13 +1,18 @@
Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
+Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
Required properties:
-- compatible: should be "innolux,p079zca"
+- compatible: should be should be one of the following.
+ -"innolux,p079zca" for Innolux 7.9" P079ZCA 768*1024 panel
+ -"innolux,p097pfg" for Innolux 9.7" P097PFG 1536*2048 panel
- reg: DSI virtual channel of the peripheral
-- power-supply: phandle of the regulator that provides the supply voltage
- enable-gpios: panel enable gpio
Optional properties:
- backlight: phandle of the backlight device attached to the panel
+- power-supply: phandle of the regulator that provides the supply voltage
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
Example:
@@ -16,6 +21,8 @@ Example:
compatible = "innolux,p079zca";
reg = <0>;
power-supply = <...>;
+ avdd-supply = <...>;
+ avee-supply = <...>;
backlight = <&backlight>;
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
