The LVDCR1 register for the R-Car gen3 SoCs was documented as having the
layout different from the gen2 SoCs in the early R-Car gen3 manuals but
since v0.52 the LVDCR1 layout is described as being the same as on the gen2
SoCs; the old CHn control values are said to be prohibited now (and there
seems to be no valid output signal when they are used).
Fixes: 6bc2e15cf21c ("drm: rcar-du: lvds: Add R-Car Gen3 support")
Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
---
drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 10 ++++------
drivers/gpu/drm/rcar-du/rcar_lvds_regs.h | 6 ++----
2 files changed, 6 insertions(+), 10 deletions(-)
Index: linux/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
+++ linux/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c
@@ -70,9 +70,8 @@ static void rcar_du_lvdsenc_start_gen2(s
/* Turn all the channels on. */
rcar_lvds_write(lvds, LVDCR1,
- LVDCR1_CHSTBY_GEN2(3) | LVDCR1_CHSTBY_GEN2(2) |
- LVDCR1_CHSTBY_GEN2(1) | LVDCR1_CHSTBY_GEN2(0) |
- LVDCR1_CLKSTBY_GEN2);
+ LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
+ LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
/*
* Turn the PLL on, wait for the startup delay, and turn the output
@@ -109,9 +108,8 @@ static void rcar_du_lvdsenc_start_gen3(s
/* Turn all the channels on. */
rcar_lvds_write(lvds, LVDCR1,
- LVDCR1_CHSTBY_GEN3(3) | LVDCR1_CHSTBY_GEN3(2) |
- LVDCR1_CHSTBY_GEN3(1) | LVDCR1_CHSTBY_GEN3(0) |
- LVDCR1_CLKSTBY_GEN3);
+ LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) |
+ LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY);
/*
* Turn the PLL on, set it to LVDS normal mode, wait for the startup
Index: linux/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h
===================================================================
--- linux.orig/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h
+++ linux/drivers/gpu/drm/rcar-du/rcar_lvds_regs.h
@@ -26,10 +26,8 @@
#define LVDCR1 0x0004
#define LVDCR1_CKSEL (1 << 15) /* Gen2 only */
-#define LVDCR1_CHSTBY_GEN2(n) (3 << (2 + (n) * 2)) /* Gen2 only */
-#define LVDCR1_CHSTBY_GEN3(n) (1 << (2 + (n) * 2)) /* Gen3 only */
-#define LVDCR1_CLKSTBY_GEN2 (3 << 0) /* Gen2 only */
-#define LVDCR1_CLKSTBY_GEN3 (1 << 0) /* Gen3 only */
+#define LVDCR1_CHSTBY(n) (3 << (2 + (n) * 2))
+#define LVDCR1_CLKSTBY (3 << 0)
#define LVDPLLCR 0x0008
#define LVDPLLCR_CEEN (1 << 14)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
