On 03/06/18 11:51, Frank Rowand wrote:
> On 03/06/18 04:30, Geert Uytterhoeven wrote:
>> Hi David,
>>
>> On Tue, Mar 6, 2018 at 4:54 AM, David Gibson
>> <da...@gibson.dropbear.id.au> wrote:
>>> On Fri, Feb 23, 2018 at 09:05:24AM +0100, Geert Uytterhoeven wrote:
>>>> On Fri, Feb 23, 2018 at 3:38 AM, Frank Rowand <frowand.l...@gmail.com>
>>>> wrote:
>>>>> I was hoping to be able to convert the .dts files to use sugar syntax
>>>>> instead of hand coding the fragment nodes, but for this specific set
>>>>> of files I failed, since the labels that would have been required do
>>>>> not already exist in the base .dts files that that overlays would be
>>>>> applied against.
>>>>
>>>> Indeed, hence the fixup overlays use "target-path".
>>>>
>>>> BTW, is there any specific reason there is no sugar syntax support in dtc
>>>> for absolute target paths? I guess to prevent adding stuff to a random
>>>> existing node, and to encourage people to use a "connector" API defined in
>>>> term of labels?
>>>
>>> Only because it hasn't been implemented. Using &{/whatever} should
>>> IMO generate a target-path and the fact it doesn't is a bug.
>>>
>>>> I'm also in the process of converting my collection of DT overlays to sugar
>>>> syntax, and lack of support for "target-path" is the sole thing that holds
>>>> me back from completing this. So for now I use a mix of sugar and
>>>> traditional overlay syntax.
>>>>
>>>> In particular, I need "target-path" for two things:
>>>> 1. To refer to the root node, for adding devices that should live at
>>>> (a board subnode of) the root node, like:
>>>> - devices connected to GPIO controllers provided by other base or
>>>> overlay devices (e.g. LEDs, displays, buttons, ...),
>>>> - clock providers for other overlays devices (e.g. fixed-clock).
>>
>>>> The former is the real blocker for me.
>>
>>> Below is draft patch adding target-path support. The pretty minimal
>>> test examples do include a case using &{/}
>>>
>>> From 8f1b35f88395adea01ce1100c5faa27dacbc8410 Mon Sep 17 00:00:00 2001
>>> From: David Gibson <da...@gibson.dropbear.id.au>
>>> Date: Tue, 6 Mar 2018 13:27:53 +1100
>>> Subject: [PATCH] Correct overlay syntactic sugar for generating target-path
>>> fragments
>>>
>>> We've recently added "syntactic sugar" support to generate runtime dtb
>>> overlays using similar syntax to the compile time overlays we've had for
>>> a while. This worked with the &label { ... } syntax, adjusting an existing
>>> labelled node, but would fail with the &{/path} { ... } syntax attempting
>>> to adjust an existing node referenced by its path.
>>>
>>> The previous code would always try to use the "target" property in the
>>> output overlay, which needs to be fixed up, and __fixups__ can only encode
>>> symbols, not paths, so the result could never work properly.
>>>
>>> This adds support for the &{/path} syntax for overlays, translating it into
>>> the "target-path" encoding in the output. It also changes existing
>>> behaviour a little because we now unconditionally one fragment for each
>>> overlay section in the source. Previously we would only create a fragment
>>> if we couldn't locally resolve the node referenced. We need this for
>>> path references, because the path is supposed to be referencing something
>>> in the (not yet known) base tree, rather than the overlay tree we are
>>> working with now. In particular one useful case for path based overlays
>>> is using &{/} - but the constructed overlay tree will always have a root
>>> node, meaning that without the change that would attempt to resolve the
>>> fragment locally, which is not what we want.
>>>
>>> Signed-off-by: David Gibson <da...@gibson.dropbear.id.au>
>>
>> Thank you, seems to work fine on dtc.git.
>
> And the patched dtc works for a dts file that I was trying to convert
> to sugar dts syntax
< snip >
I noticed that a space in "&{/}" is an error. I wanted to check whether
that was deliberate, or that the patch wasn't fully complete yet.
cat path_sugar_v1.dts
$ nl -ba path_sugar_v1.dts
1
2 /dts-v1/;
3 /plugin/;
4 &{/} {
5 #address-cells = <2>;
6 #size-cells = <2>;
7
8 my_node@feb90000 {
9 compatible = "vendor,device";
10 reg = <0 0xfeb90000 0 0x1c>;
11
12 };
13
14 };
$ dtc -O dts path_sugar_v1.dts
/dts-v1/;
/ {
fragment@0 {
target-path = [2f 00];
__overlay__ {
#address-cells = <0x2>;
#size-cells = <0x2>;
my_node@feb90000 {
compatible = "vendor,device";
reg = <0x0 0xfeb90000 0x0 0x1c>;
};
};
};
};
$ nl -ba path_sugar_v2.dts
1
2 /dts-v1/;
3 /plugin/;
4 &{ / } {
5 #address-cells = <2>;
6 #size-cells = <2>;
7
8 my_node@feb90000 {
9 compatible = "vendor,device";
10 reg = <0 0xfeb90000 0 0x1c>;
11
12 };
13
14 };
$ dtc -O dts path_sugar_v2.dts
Error: path_sugar_v2.dts:4.1-2 syntax error
FATAL ERROR: Unable to parse input tree
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
