From: Lin Huang <h...@rock-chips.com>
We should check AUX_EN bit to confirm the AUX CH operation is completed.
Cc: Stéphane Marchesin <marc...@chromium.org>
Signed-off-by: Lin Huang <h...@rock-chips.com>
Signed-off-by: zain wang <w...@rock-chips.com>
Signed-off-by: Sean Paul <seanp...@chromium.org>
Signed-off-by: Thierry Escande <thierry.esca...@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balle...@collabora.com>
Tested-by: Marek Szyprowski <m.szyprow...@samsung.com>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 25 +++++++++++++----------
1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 9df2f3ef000c..e78c861b9e06 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -1073,9 +1073,9 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device
*dp,
{
u32 reg;
u8 *buffer = msg->buffer;
- int timeout_loop = 0;
unsigned int i;
int num_transferred = 0;
+ int ret;
/* Buffer size of AUX CH is 16 bytes */
if (WARN_ON(msg->size > 16))
@@ -1139,17 +1139,20 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device
*dp,
writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
- /* Is AUX CH command reply received? */
+ ret = readx_poll_timeout(readl, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2,
+ reg, !(reg & AUX_EN), 25, 500 * 1000);
+ if (ret) {
+ dev_err(dp->dev, "AUX CH enable timeout!\n");
+ return -ETIMEDOUT;
+ }
+
/* TODO: Wait for an interrupt instead of looping? */
- reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
- while (!(reg & RPLY_RECEIV)) {
- timeout_loop++;
- if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "AUX CH command reply failed!\n");
- return -ETIMEDOUT;
- }
- reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
- usleep_range(10, 11);
+ /* Is AUX CH command reply received? */
+ ret = readx_poll_timeout(readl, dp->reg_base + ANALOGIX_DP_INT_STA,
+ reg, reg & RPLY_RECEIV, 10, 20 * 1000);
+ if (ret) {
+ dev_err(dp->dev, "AUX CH cmd reply timeout!\n");
+ return -ETIMEDOUT;
}
/* Clear interrupt source for AUX CH command reply */
--
2.16.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
