For Geminilake and Cannonlake+ the Y-coordinate support must be
enabled in PSR2_CTL too.
Spec: 7713 and 7720
Cc: Dhinakaran Pandiyan <dhinakaran.pandi...@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.v...@intel.com>
Signed-off-by: José Roberto de Souza <jose.so...@intel.com>
---
v3: rebased
drivers/gpu/drm/i915/i915_reg.h | 3 +++
drivers/gpu/drm/i915/intel_psr.c | 16 ++++++++++++----
2 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 33e52cc98d99..9d61ab1288d3 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4058,6 +4058,8 @@ enum {
#define EDP_PSR2_CTL _MMIO(0x6f900)
#define EDP_PSR2_ENABLE (1<<31)
#define EDP_SU_TRACK_ENABLE (1<<30)
+#define EDP_Y_COORDINATE_VALID (1<<26) /* GLK and CNL+ */
+#define EDP_Y_COORDINATE_ENABLE (1<<25) /* GLK and CNL+ */
#define EDP_MAX_SU_DISABLE_TIME(t) ((t)<<20)
#define EDP_MAX_SU_DISABLE_TIME_MASK (0x1f<<20)
#define EDP_PSR2_TP2_TIME_500 (0<<8)
@@ -7064,6 +7066,7 @@ enum {
#define CHICKEN_TRANS_A 0x420c0
#define CHICKEN_TRANS_B 0x420c4
#define CHICKEN_TRANS(trans) _MMIO_TRANS(trans, CHICKEN_TRANS_A,
CHICKEN_TRANS_B)
+#define VSC_DATA_SEL_SOFTWARE_CONTROL (1<<25) /* GLK and CNL+ */
#define DDI_TRAINING_OVERRIDE_ENABLE (1<<19)
#define DDI_TRAINING_OVERRIDE_VALUE (1<<18)
#define DDIE_TRAINING_OVERRIDE_ENABLE (1<<17) /* CHICKEN_TRANS_A only */
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index fb2d0fe7106b..84e1f8be5c48 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -386,8 +386,10 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
/* FIXME: selective update is probably totally broken because it doesn't
* mesh at all with our frontbuffer tracking. And the hw alone isn't
* good enough. */
- val |= EDP_PSR2_ENABLE |
- EDP_SU_TRACK_ENABLE;
+ val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
+ if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
+ val |= EDP_Y_COORDINATE_VALID | EDP_Y_COORDINATE_ENABLE;
+ }
if (drm_dp_dpcd_readb(&intel_dp->aux,
DP_SYNCHRONIZATION_LATENCY_IN_SINK,
@@ -569,8 +571,14 @@ static void hsw_psr_enable_source(struct intel_dp
*intel_dp,
hsw_psr_setup_aux(intel_dp);
if (dev_priv->psr.psr2_support) {
- u32 chicken = PSR2_VSC_ENABLE_PROG_HEADER
- | PSR2_ADD_VERTICAL_LINE_COUNT;
+ u32 chicken = I915_READ(CHICKEN_TRANS(cpu_transcoder));
+
+ if (INTEL_GEN(dev_priv) == 9 && !IS_GEMINILAKE(dev_priv))
+ chicken |= (PSR2_VSC_ENABLE_PROG_HEADER
+ | PSR2_ADD_VERTICAL_LINE_COUNT);
+
+ else
+ chicken &= ~VSC_DATA_SEL_SOFTWARE_CONTROL;
I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
I915_WRITE(EDP_PSR_DEBUG,
--
2.16.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
