During probe there may not be any connectors yet if e.g. the panel
failed or hasn't been probed yet. I hitting this in practice the panels
probing was being delayed due to using a gpio backlight.
Fix this by returning -EPROBE_DEFER so the probing will be retried.
Signed-off-by: Sjoerd Simons <sjoerd.sim...@collabora.co.uk>
---
drivers/gpu/drm/tilcdc/tilcdc_drv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c
b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
index 1afde61f1247..59f0a44bb6e3 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
@@ -380,7 +380,7 @@ static int tilcdc_init(struct drm_driver *ddrv, struct
device *dev)
if (!priv->external_connector &&
((priv->num_encoders == 0) || (priv->num_connectors == 0))) {
dev_err(dev, "no encoders/connectors found\n");
- ret = -ENXIO;
+ ret = -EPROBE_DEFER;
goto init_failed;
}
--
2.16.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
