On Wed, Apr 18, 2018 at 05:50:02PM +0530, Sandeep Panda wrote:
> The Innolux TV123WAM is a 12.3" eDP display panel
> with 2160x1440 resolution.
Why don't you just submit this for upstream?
>
> Signed-off-by: Sandeep Panda <spa...@codeaurora.org>
> ---
> .../bindings/display/panel/innolux,edp-2k-panel.txt | 21
> +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
>
> diff --git
> a/Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
> b/Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
> new file mode 100644
> index 0000000..19f271c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
> @@ -0,0 +1,21 @@
> +Innolux TV123WAM 12.3 inch eDP display panel
> +
> +Required properties:
> +- power-supply: regulator to provide the supply voltage
> +- enable-gpios: GPIO pin to enable or disable the panel
Need to state the active state.
> +
> +Optional properties:
> +- backlight: phandle of the backlight device attached to the panel
> +
> +Example:
> +
> + edp_panel: edp_panel {
panel {
> + compatible = "innolux, edp_2k_panel";
spurious space ^
> + reg = <0>;
Not documented. Should be dropped.
> +
> + enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
> +
> + power-supply = <&pm8916_l8>;
> +
Remove the extra blank lines.
> + backlight = <&backlight>;
> + };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
