Den 23.04.2018 18.16, skrev Tom Callaway:
The PiTFT (ili9340) has a hardware reset circuit that resets only on power-on and not on each reboot through a gpio like the rpi-display does. As a result, we need to always apply the rotation value regardless of the display "on/off" state. Moved the rotation setting code below out_enable:.Signed-off-by: Tom Callaway <tcall...@redhat.com> --- drivers/gpu/drm/tinydrm/mi0283qt.c | 41 +++++++++++++++++++++----------------- 1 file changed, 23 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/tinydrm/mi0283qt.c b/drivers/gpu/drm/tinydrm/mi0283qt.c index 4e6d2ee94e55..2bb9e3ce4823 100644 --- a/drivers/gpu/drm/tinydrm/mi0283qt.c +++ b/drivers/gpu/drm/tinydrm/mi0283qt.c @@ -84,24 +84,6 @@ static void mi0283qt_enable(struct drm_simple_display_pipe *pipe, /* Memory Access Control */ mipi_dbi_command(mipi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);- switch (mipi->rotation) {- default: - addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | - ILI9341_MADCTL_MX; - break; - case 90: - addr_mode = ILI9341_MADCTL_MY; - break; - case 180: - addr_mode = ILI9341_MADCTL_MV; - break; - case 270: - addr_mode = ILI9341_MADCTL_MX; - break; - } - addr_mode |= ILI9341_MADCTL_BGR; - mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); - /* Frame Rate */ mipi_dbi_command(mipi, ILI9341_FRMCTR1, 0x00, 0x1b);@@ -127,6 +109,29 @@ static void mi0283qt_enable(struct drm_simple_display_pipe *pipe,msleep(100);out_enable:+ /* The PiTFT (ili9340) has a hardware reset circuit that + * resets only on power-on and not on each reboot through + * a gpio like the rpi-display does. + * As a result, we need to always apply the rotation value + * regardless of the display "on/off" state. + */ + switch (mipi->rotation) { + default: + addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | + ILI9341_MADCTL_MX; + break; + case 90: + addr_mode = ILI9341_MADCTL_MY; + break; + case 180: + addr_mode = ILI9341_MADCTL_MV; + break; + case 270: + addr_mode = ILI9341_MADCTL_MX; + break; + } + addr_mode |= ILI9341_MADCTL_BGR; + mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); mipi_dbi_enable_flush(mipi, crtc_state, plane_state); }
Thanks for fixing this. Reviewed-by: Noralf Trønnes <nor...@tronnes.org> _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
