Hi,
Le mercredi 18 octobre 2017 à 16:49 +0800, Yingjoe Chen a écrit :
> Hi,
>
>
> On Fri, 2017-09-29 at 15:09 +0200, Ulrich Hecht wrote:
> > Signed-off-by: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>
> > ---
> > arch/arm64/boot/dts/mediatek/Makefile | 1 +
> > arch/arm64/boot/dts/mediatek/mt8173-elm-rev3.dts | 21 +
> > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 210 +++++
> > arch/arm64/boot/dts/mediatek/mt8173-oak.dtsi | 1014
> > ++++++++++++++++++++++
> > 4 files changed, 1246 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-rev3.dts
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-oak.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/Makefile
> > b/arch/arm64/boot/dts/mediatek/Makefile
> > index 151723b..0521e29 100644
> > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-rev3.dtb
> >
> > always := $(dtb-y)
> > subdir-y := $(dts-dirs)
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-rev3.dts
> > b/arch/arm64/boot/dts/mediatek/mt8173-elm-rev3.dts
> > new file mode 100644
> > index 0000000..68d4095
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-rev3.dts
> > @@ -0,0 +1,21 @@
> > +/*
> > + * Copyright 2016 MediaTek Inc.
> > + * Author: Eddie Huang <eddie.hu...@mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > modify
> > + * it under the terms of the GNU General Public License version 2
> > as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +/dts-v1/;
> > +#include "mt8173-elm.dtsi"
> > +
> > +/ {
> > + model = "Mediatek Elm rev3 board";
> > + compatible = "google,elm-rev3", "google,elm",
> > "mediatek,mt8173";
> > +};
When mainlining ARM Chromium OS devices, it seems that per-revision dts
files are often dropped and merged into a single-revision dts for the
whole device. This is perhaps because the early revisions of the devices
are for internal development and never make it to the market.
Also, I would suggest using an explicit model name instead of copying
the compatible. Here, that would be "Chromebook R13 CB5-312T".
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > new file mode 100644
> > index 0000000..850037f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > @@ -0,0 +1,210 @@
> > +/*
> > + * Copyright 2016 MediaTek Inc.
> > + * Author: Eddie Huang <eddie.hu...@mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > modify
> > + * it under the terms of the GNU General Public License version 2
> > as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include "mt8173-oak.dtsi"
> > +
> > +/ {
> > + hdmicon: connector {
> > + compatible = "hdmi-connector";
> > + label = "hdmi";
> > + type = "a";
> > +
> > + port {
> > + hdmi_connector_in: endpoint {
> > + remote-endpoint =
> > <&hdmi_mux_out_hdmi>;
> > + };
> > + };
> > + };
> > +
> > + hdmi_mux: hdmi_mux {
> > + compatible = "gpio-display-mux";
>
> Where is the binding for this?
>
> > + status = "okay";
> > + detect-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&hdmi_mux_pins>;
>
>
> If you use gpio_request or related api, it will set pinmux
> automatically.
> Do we really need this pinctrl?
>
> > + ddc-i2c-bus = <&hdmiddc0>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 { /* input */
> > + reg = <0>;
> > +
> > + hdmi_mux_in: endpoint {
> > + remote-endpoint =
> > <&hdmi0_out>;
> > + };
> > + };
> > +
> > + port@1 { /* output */
> > + reg = <1>;
> > +
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + hdmi_mux_out_anx: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint =
> > <&anx7688_in>;
> > + };
> > +
> > + hdmi_mux_out_hdmi: endpoint@1 {
> > + reg = <1>;
> > + remote-endpoint =
> > <&hdmi_connector_in>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + sound: sound {
> > + compatible = "mediatek,mt8173-rt5650";
> > + mediatek,audio-codec = <&rt5650 &hdmi0>;
> > + mediatek,mclk = <1>;
> > + mediatek,platform = <&afe>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&aud_i2s2>;
> > + codec-capture {
> > + sound-dai = <&rt5650 1>;
> > + };
> > + };
> > +};
> > +
> > +&aud_i2s2 {
> > + pins1 {
> > + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>,
> > + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>,
> > + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>,
> > + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1
> > >,
> > + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>,
> > + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>,
> > + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2
> > >;
> > + bias-pull-down;
> > + };
> > +};
> > +
> > +&cpu_thermal {
> > + sustainable-power = <4500>; /* milliwatts */
> > + trips {
> > + threshold: trip-point@0 {
> > + temperature = <60000>;
> > + };
> > +
> > + target: trip-point@1 {
> > + temperature = <65000>;
> > + };
> > + };
> > +};
> > +
> > +&cros_ec {
> > + i2c_tunnel_b: i2c-tunnel@1 {
> > + compatible = "google,cros-ec-i2c-tunnel";
> > + google,remote-bus = <1>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + anx7688: anx7688@2c {
> > + compatible = "analogix,anx7688";
> > + status = "okay";
> > + reg = <0x2c>;
> > +
> > + port {
> > + anx7688_in: endpoint {
> > + remote-endpoint =
> > <&hdmi_mux_out_anx>;
> > + };
> > + };
> > + };
> > + };
> > +};
> > +
> > +&hdmi0 {
> > + status = "okay";
> > +
> > + ports {
> > + port@1 {
> > + reg = <1>;
> > + hdmi0_out: endpoint {
> > + remote-endpoint = <&hdmi_mux_in>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&hdmi_phy {
> > + status = "okay";
> > + mediatek,ibias = <0xc>;
> > +};
> > +
> > +&i2c0 {
> > + ps8640: edp-bridge@8 {
> > + compatible = "parade,ps8640";
>
> binding?
>
> > + reg = <0x8>;
> > + sleep-gpios = <&pio 127 GPIO_ACTIVE_HIGH>;
> > + reset-gpios = <&pio 115 GPIO_ACTIVE_HIGH>;
> > + mode-sel-gpios = <&pio 92 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&ps8640_pins>;
>
> same here.
> Please check all pinctrl nodes that set FUNC to GPIO in this patch.
>
> > + vdd12-supply = <&ps8640_fixed_1v2>;
> > + vdd33-supply = <&mt6397_vgp2_reg>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + ps8640_in: endpoint {
> > + remote-endpoint = <&dsi0_out>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + ps8640_out: endpoint {
> > + remote-endpoint = <&panel_in>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&gpio_keys {
> > + lid {
> > + gpios = <&pio 69 GPIO_ACTIVE_LOW>;
> > + };
> > +};
> > +
> > +&mt6397_vgp6_reg {
> > + regulator-always-on;
> > +};
> > +
> > +&pio {
> > + hdmi_mux_pins: hdmi_mux_pins {
> > + pins1 {
> > + pinmux =
> > <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>;
> > + };
> > + };
> > +};
> > +
> > +&ps8640_fixed_1v2 {
> > + regulator-enable-ramp-delay = <2000>;
> > +};
> > +
> > +&rt5650 {
> > + #sound-dai-cells = <1>;
> > + realtek,dmic1-data-pin = <2>;
> > + realtek,jd-mode = <2>;
> > +};
> > +
> > +
> > +&trackpad {
> > + vcc-supply = <&mt6397_vgp6_reg>;
> > +};
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-oak.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8173-oak.dtsi
> > new file mode 100644
> > index 0000000..33a5b07
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-oak.dtsi
> > @@ -0,0 +1,1014 @@
> > +/*
> > + * This program is free software; you can redistribute it and/or
> > modify
> > + * it under the terms of the GNU General Public License version 2
> > as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include "mt8173.dtsi"
> > +#include "mt8173-pinfunc.h"
> > +
> > +/ {
> > + aliases {
> > + serial0 = &uart0;
> > + serial1 = &uart1;
> > + serial2 = &uart2;
> > + serial3 = &uart3;
> > + };
> > +
> > + memory@40000000 {
> > + device_type = "memory";
> > + reg = <0 0x40000000 0 0x80000000>;
> > + };
> > +
> > + backlight_lcd: backlight_lcd {
> > + compatible = "pwm-backlight";
> > + pwms = <&pwm0 0 1000000>;
> > + brightness-levels = <
> > + 0 16 32 48 64 80 96 112
> > + 128 144 160 176 192 208 224 240
> > + 255
> > + >;
> > + default-brightness-level = <9>;
> > + power-supply = <&bl_fixed_reg>;
> > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&disp_pwm0_pins>;
> > + status = "okay";
> > + };
> > +
> > + bl_fixed_reg: fixedregulator@2 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "bl_fixed";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + startup-delay-us = <1000>;
> > + enable-active-high;
> > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&bl_fixed_pins>;
> > + };
> > +
> > + chosen {
> > + linux,stdout-path = &uart0;
> > + };
> > +
> > + firmware {
> > + chromeos {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&chromeos_write_protect>;
> > + write-protect-gpio = <&pio 4
> > GPIO_ACTIVE_LOW>;
> > + };
> > + };
> > +
> > + gpio_keys: gpio-keys {
> > + compatible = "gpio-keys";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&gpio_keys_pins>;
> > +
> > + lid {
> > + label = "Lid";
> > + gpios = <&pio 12 GPIO_ACTIVE_LOW>;
> > + linux,code = <0>; /* SW_LID */
> > + linux,input-type = <5>; /* EV_SW */
> > + gpio-key,wakeup;
> > + };
> > +
> > + power {
> > + label = "Power";
> > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
> > + linux,code = <KEY_POWER>;
> > + debounce-interval = <30>;
> > + gpio-key,wakeup;
> > + };
> > +
> > + tablet_mode {
> > + label = "Tablet_mode";
> > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
> > + linux,code = <1>; /* SW_TABLET_MODE */
> > + linux,input-type = <5>; /* EV_SW */
> > + gpio-key,wakeup;
> > + };
> > +
> > + volume_down {
> > + label = "Volume_down";
> > + gpios = <&pio 123 GPIO_ACTIVE_LOW>;
> > + linux,code = <KEY_VOLUMEDOWN>;
> > + };
> > +
> > + volume_up {
> > + label = "Volume_up";
> > + gpios = <&pio 124 GPIO_ACTIVE_LOW>;
> > + linux,code = <KEY_VOLUMEUP>;
> > + };
> > + };
> > +
> > + panel: panel {
> > + compatible = "lg,lp120up1";
> > + power-supply = <&panel_fixed_3v3>;
> > + ddc-i2c-bus = <&i2c4>;
> > + backlight = <&backlight_lcd>;
> > +
> > + port {
> > + panel_in: endpoint {
> > + remote-endpoint = <&ps8640_out>;
> > + };
> > + };
> > + };
> > +
> > + panel_fixed_3v3: regulator@1 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "PANEL_3V3";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + enable-active-high;
> > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&panel_fixed_pins>;
> > + };
> > +
> > + ps8640_fixed_1v2: regulator@2 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "PS8640_1V2";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + enable-active-high;
> > + regulator-boot-on;
> > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&ps8640_fixed_pins>;
> > + };
> > +
> > + sdio_fixed_3v3: fixedregulator@0 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "3V3";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + usb_p1_vbus: regulator@3 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "usb_vbus";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + };
> > +
> > + usb_p0_vbus: regulator@4 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vbus";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + };
> > +};
> > +
> > +&cec {
> > + status = "okay";
> > +};
> > +
> > +&cpu0 {
> > + proc-supply = <&mt6397_vpca15_reg>;
> > +};
> > +
> > +&cpu1 {
> > + proc-supply = <&mt6397_vpca15_reg>;
> > +};
> > +
> > +&cpu2 {
> > + proc-supply = <&da9211_vcpu_reg>;
> > + sram-supply = <&mt6397_vsramca7_reg>;
> > +};
> > +
> > +&cpu3 {
> > + proc-supply = <&da9211_vcpu_reg>;
> > + sram-supply = <&mt6397_vsramca7_reg>;
> > +};
> > +
> > +&cpu_thermal {
> > + sustainable-power = <5000>; /* milliwatts */
> > +};
> > +
> > +&dsi0 {
> > + status = "okay";
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + dsi0_out: endpoint {
> > + remote-endpoint = <&ps8640_in>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&dpi0 {
> > + status = "okay";
> > +};
> > +
> > +&hdmi_phy {
> > + status = "okay";
> > + mediatek,ibias = <0x3f>;
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > +
> > + rt5650: audio-codec@1a {
> > + compatible = "realtek,rt5650";
> > + reg = <0x1a>;
> > + avdd-supply = <&mt6397_vgp1_reg>;
> > + cpvdd-supply = <&mt6397_vcama_reg>;
> > + interrupt-parent = <&pio>;
> > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&rt5650_irq>;
> > + realtek,jd-mode = <3>;
> > + };
> > +};
> > +
> > +&i2c1 {
> > + clock-frequency = <1500000>;
> > + status = "okay";
> > +
> > + da9211: da9211@68 {
> > + compatible = "dlg,da9211";
> > + reg = <0x68>;
> > +
> > + regulators {
> > + da9211_vcpu_reg: BUCKA {
> > + regulator-name = "VBUCKA";
> > + regulator-min-microvolt = <
> > 700000>;
> > + regulator-max-microvolt =
> > <1310000>;
> > + regulator-min-microamp =
> > <2000000>;
> > + regulator-max-microamp =
> > <4400000>;
> > + regulator-ramp-delay = <10000>;
> > + regulator-always-on;
> > +/* regulator-supported-modes =
> > + <REGULATOR_OPERATION_MODE_F
> > AST
> > + REGULATOR_OPERATION_MODE_N
> > ORMAL>;*/
>
> Please remove unused code.
> Same for all comment out parts in this patch.
>
>
> Joe.C
>
>
>
> _______________________________________________
> Linux-mediatek mailing list
> linux-media...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
--
Paul Kocialkowski,
developer of free digital technology and hardware support.
Website: https://www.paulk.fr/
Coding blog: https://code.paulk.fr/
Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/
signature.asc
Description: This is a digitally signed message part
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
