Hi Stefan,

> Stefan Schake <stsch...@gmail.com> hat am 5. Mai 2018 um 19:29 geschrieben:
> 
> 
> On Sat, May 5, 2018 at 1:47 PM, Stefan Wahren <stefan.wah...@i2se.com> wrote:
> > Hi,
> >
> > after submit of the latest bcm2835 clock fixes, i thought this issue has 
> > been fixed. But i've seen this issue with current mainline 4.17-rc3 
> > (bcm2835_defconfig) on Raspberry Pi 1 B (using U-Boot TFTP Boot). Strangly 
> > i couldn't reproduce this issue with same kernel but using only the 
> > Foundation bootloader (without U-Boot TFTP Boot).
> >
> > U-Boot version: 2018.03
> >
> > I triggered the warning using my HDMI switch:
> >
> > [  198.304572] ------------[ cut here ]------------
> > [  198.304693] WARNING: CPU: 0 PID: 10 at 
> > drivers/gpu/drm/drm_atomic_helper.c:1351 
> > drm_atomic_helper_wait_for_vblanks+0x1d4/0x1f0
> > [  198.304703] [CRTC:68:crtc-2] vblank wait timed out
> > [  198.304751] Modules linked in: bcm2835_rng rng_core vchiq(C)
> > [  198.304790] CPU: 0 PID: 10 Comm: kworker/0:1 Tainted: G         C        
> > 4.17.0-rc3+ #1
> > [  198.304796] Hardware name: BCM2835
> > [  198.304817] Workqueue: events output_poll_execute
> > [  198.304867] [<c010f8d8>] (unwind_backtrace) from [<c010cda4>] 
> > (show_stack+0x20/0x24)
> > [  198.304934] [<c010cda4>] (show_stack) from [<c079ae74>] 
> > (dump_stack+0x20/0x28)
> > [  198.304971] [<c079ae74>] (dump_stack) from [<c011e61c>] 
> > (__warn+0xec/0x104)
> > [  198.305012] [<c011e61c>] (__warn) from [<c011e67c>] 
> > (warn_slowpath_fmt+0x48/0x50)
> > [  198.305048] [<c011e67c>] (warn_slowpath_fmt) from [<c0421638>] 
> > (drm_atomic_helper_wait_for_vblanks+0x1d4/0x1f0)
> > [  198.305098] [<c0421638>] (drm_atomic_helper_wait_for_vblanks) from 
> > [<c0455ce8>] (vc4_atomic_complete_commit+0x80/0xb8)
> > [  198.305144] [<c0455ce8>] (vc4_atomic_complete_commit) from [<c0455e30>] 
> > (vc4_atomic_commit+0x110/0x11c)
> > [  198.305174] [<c0455e30>] (vc4_atomic_commit) from [<c043dbac>] 
> > (drm_atomic_commit+0x50/0x60)
> > [  198.305202] [<c043dbac>] (drm_atomic_commit) from [<c04251e4>] 
> > (restore_fbdev_mode_atomic+0x80/0x1cc)
> > [  198.305228] [<c04251e4>] (restore_fbdev_mode_atomic) from [<c0426a8c>] 
> > (restore_fbdev_mode+0x38/0x144)
> > [  198.305270] [<c0426a8c>] (restore_fbdev_mode) from [<c0427fa8>] 
> > (drm_fb_helper_restore_fbdev_mode_unlocked+0x58/0x8c)
> > [  198.305296] [<c0427fa8>] (drm_fb_helper_restore_fbdev_mode_unlocked) 
> > from [<c0428030>] (drm_fb_helper_set_par+0x54/0x60)
> > [  198.305320] [<c0428030>] (drm_fb_helper_set_par) from [<c0427f44>] 
> > (drm_fb_helper_hotplug_event+0xc8/0xd4)
> > [  198.305343] [<c0427f44>] (drm_fb_helper_hotplug_event) from [<c0428078>] 
> > (drm_fb_helper_output_poll_changed+0x1c/0x20)
> > [  198.305382] [<c0428078>] (drm_fb_helper_output_poll_changed) from 
> > [<c0419494>] (drm_kms_helper_hotplug_event+0x34/0x38)
> > [  198.305409] [<c0419494>] (drm_kms_helper_hotplug_event) from 
> > [<c041963c>] (output_poll_execute+0x16c/0x17c)
> > [  198.305440] [<c041963c>] (output_poll_execute) from [<c01337e4>] 
> > (process_one_work+0x1e0/0x368)
> > [  198.305466] [<c01337e4>] (process_one_work) from [<c0134620>] 
> > (worker_thread+0x2a0/0x418)
> > [  198.305511] [<c0134620>] (worker_thread) from [<c0138fa8>] 
> > (kthread+0x144/0x15c)
> > [  198.305539] [<c0138fa8>] (kthread) from [<c01010e8>] 
> > (ret_from_fork+0x14/0x2c)
> > [  198.305549] Exception stack(0xc9939fb0 to 0xc9939ff8)
> > [  198.305562] 9fa0:                                     00000000 00000000 
> > 00000000 00000000
> > [  198.305578] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 
> > 00000000 00000000
> > [  198.305591] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > [  198.305630] ---[ end trace 9c4071c657268b83 ]---
> >
> > I also dumped clk_summary in both cases, but they were identical.
> >
> > Are their any helpful information, which i can provide?
> >
> > Best regards
> > Stefan
> 
> I have seen this happen with one of those cheap Waveshare HDMI displays.
> More often when connecting its power to the RPi versus on a separate
> supply. Goes away when using a real, proper HDMI display. They come with
> bad EDID data so I pretty much just blamed the display at the time.
> 
> Does this happen during a switch and whats on the other end?

The issue happens only in combination with U-Boot. If i switch the source 
between my PC and the RPi then sometimes the warning is triggered.

VPU firmware: 2018-04-16
Display: HP ZR2440w

> 
> Thanks,
> Stefan
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to