On Mon, 7 May 2018 17:25:30 +0200
Daniel Vetter <dan...@ffwll.ch> wrote:
> On Mon, May 07, 2018 at 05:15:33PM +0200, Daniel Vetter wrote:
> > On Mon, May 07, 2018 at 04:44:32PM +0200, Boris Brezillon wrote:
> > > We have 3 drivers defining the "underscan", "underscan hborder" and
> > > "underscan vborder" properties (radeon, amd and nouveau) and we are
> > > about to add the same kind of thing in VC4.
> > >
> > > Define generic underscan props and add new fields to the drm_connector
> > > state so that the property parsing logic can be shared by all DRM
> > > drivers.
> > >
> > > A driver can now attach underscan properties to its connector through
> > > the drm_connector_attach_underscan_properties() helper, and can
> > > check/apply the underscan setup based on the
> > > drm_connector_state->underscan fields.
> > >
> > > Signed-off-by: Boris Brezillon <boris.brezil...@bootlin.com>
> > > ---
> > > drivers/gpu/drm/drm_atomic.c | 12 ++++
> > > drivers/gpu/drm/drm_connector.c | 120
> > > ++++++++++++++++++++++++++++++++++++++++
> > > include/drm/drm_connector.h | 78 ++++++++++++++++++++++++++
> > > 3 files changed, 210 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> > > index dc850b4b6e21..b7312bd172c9 100644
> > > --- a/drivers/gpu/drm/drm_atomic.c
> > > +++ b/drivers/gpu/drm/drm_atomic.c
> > > @@ -1278,6 +1278,12 @@ static int
> > > drm_atomic_connector_set_property(struct drm_connector *connector,
> > > return -EINVAL;
> > > }
> > > state->content_protection = val;
> > > + } else if (property == connector->underscan_mode_property) {
> > > + state->underscan.mode = val;
> > > + } else if (property == connector->underscan_hborder_property) {
> > > + state->underscan.hborder = val;
> > > + } else if (property == connector->underscan_vborder_property) {
> > > + state->underscan.vborder = val;
> > > } else if (connector->funcs->atomic_set_property) {
> > > return connector->funcs->atomic_set_property(connector,
> > > state, property, val);
> > > @@ -1359,6 +1365,12 @@ drm_atomic_connector_get_property(struct
> > > drm_connector *connector,
> > > *val = state->scaling_mode;
> > > } else if (property == connector->content_protection_property) {
> > > *val = state->content_protection;
> > > + } else if (property == connector->underscan_mode_property) {
> > > + *val = state->underscan.mode;
> > > + } else if (property == connector->underscan_hborder_property) {
> > > + *val = state->underscan.hborder;
> > > + } else if (property == connector->underscan_vborder_property) {
> > > + *val = state->underscan.vborder;
> > > } else if (connector->funcs->atomic_get_property) {
> > > return connector->funcs->atomic_get_property(connector,
> > > state, property, val);
> > > diff --git a/drivers/gpu/drm/drm_connector.c
> > > b/drivers/gpu/drm/drm_connector.c
> > > index dfc8ca1e9413..9937390b8a25 100644
> > > --- a/drivers/gpu/drm/drm_connector.c
> > > +++ b/drivers/gpu/drm/drm_connector.c
> > > @@ -914,6 +914,31 @@ DRM_ENUM_NAME_FN(drm_get_content_protection_name,
> > > drm_cp_enum_list)
> > > * can also expose this property to external outputs, in which
> > > case they
> > > * must support "None", which should be the default (since
> > > external screens
> > > * have a built-in scaler).
> >
> > I think a new section here would be good, to make it more obvious this is
> > a group of properties. Plus a reference to
> > drm_connector_attach_underscan_properties().
> >
> > > + *
> > > + * underscan:
> > > + * This properties defines whether underscan is activated or not,
> > > and when
> > > + * it is activated, how the horizontal and vertical borders are
> > > calculated:
> > > + *
> > > + * off:
> > > + * Underscan is disabled. The output image shouldn't be
> > > scaled to
> > > + * take screen borders into account.
> > > + * on:
> > > + * Underscan is activated and horizontal and vertical
> > > borders are
> > > + * specified through the "underscan hborder" and
> > > + * "underscan vborder" properties.
> > > + * auto:
> > > + * Underscan is activated and horizontal and vertical
> > > borders are
> > > + * automatically chosen by the driver.
> > > + *
> > > + * underscan hborder:
> > > + * Horizontal border expressed in pixels. The border is symmetric,
> > > which
> > > + * means you'll have half of this value placed on the left and the
> > > other
> > > + * half on the right.
> > > + *
> > > + * underscan vborder:
> > > + * Vertical border expressed in pixels. The border is symmetric,
> > > which
> > > + * means you'll have half of this value placed on the top and the
> > > other
> > > + * half on the bottom.
> > > */
> > >
> > > int drm_connector_create_standard_properties(struct drm_device *dev)
> > > @@ -1108,6 +1133,101 @@ int drm_mode_create_tv_properties(struct
> > > drm_device *dev,
> > > }
> > > EXPORT_SYMBOL(drm_mode_create_tv_properties);
> > >
> > > +static const struct drm_prop_enum_list drm_underscan_mode_enum_list[] = {
> > > + { DRM_UNDERSCAN_OFF, "off" },
> > > + { DRM_UNDERSCAN_ON, "on" },
> > > + { DRM_UNDERSCAN_AUTO, "auto" },
> > > +};
> > > +
> > > +/**
> > > + * drm_connector_attach_underscan_properties - attach atomic underscan
> > > + * properties
> > > + * @connector: connector to attach underscan mode properties on.
> > > + * @mode_mask: bitmask of %DRM_UNDERSCAN_XX modes encoding the supported
> > > + * underscan modes.
> > > + * @max_hborder: maximum size of the horizontal border expressed in
> > > pixels.
> > > + * Should be > 0.
> > > + * @max_vborder: maximum size of the vertical border expressed in pixels.
> > > + * Should be > 0.
> > > + *
> > > + * This is used to add support for underscan to atomic drivers.
> > > + * The underscan config will be set to &drm_connector_state.underscan
> > > + * and can be used from &drm_connector_helper_funcs->atomic_check for
> > > + * validation.
> > > + *
> > > + * Returns:
> > > + * Zero on success, negative errno on failure.
> > > + */
> > > +int drm_connector_attach_underscan_properties(struct drm_connector
> > > *connector,
> > > + u32 mode_mask, u64 max_hborder,
> > > + u64 max_vborder)
> > > +{
> > > + unsigned int i, nmodes = ARRAY_SIZE(drm_underscan_mode_enum_list);
> > > + struct drm_device *dev = connector->dev;
> > > + struct drm_property *prop;
> > > +
> > > + if (!max_hborder || !max_vborder)
> > > + return -EINVAL;
> > > +
> > > + if (!hweight32(mode_mask) || (mode_mask & ~GENMASK(nmodes - 1, 0)))
> > > + return -EINVAL;
> > > +
> > > + prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, "underscan",
> > > + hweight32(mode_mask));
> > > + if (!prop)
> > > + return -ENOMEM;
> > > +
> > > + for (i = 0; i < ARRAY_SIZE(drm_underscan_mode_enum_list); i++) {
> > > + const struct drm_prop_enum_list *entry;
> > > + int ret;
> > > +
> > > + if (!(BIT(i) & mode_mask))
> > > + continue;
> > > +
> > > + entry = &drm_underscan_mode_enum_list[i];
> > > + ret = drm_property_add_enum(prop, entry->type, entry->name);
> > > + if (ret)
> > > + goto err_free_mode_prop;
> > > + }
> > > +
> > > + connector->underscan_mode_property = prop;
> > > +
> > > + prop = drm_property_create_range(dev, 0, "underscan hborder", 0,
> > > + max_hborder);
> > > + if (!prop)
> > > + goto err_free_mode_prop;
> > > +
> > > + connector->underscan_hborder_property = prop;
> > > +
> > > + prop = drm_property_create_range(dev, 0, "underscan vborder", 0,
> > > + max_vborder);
> > > + if (!prop)
> > > + goto err_free_hborder_prop;
> > > +
> > > + connector->underscan_vborder_property = prop;
> > > +
> > > + drm_object_attach_property(&connector->base,
> > > + connector->underscan_mode_property,
> > > + DRM_UNDERSCAN_OFF);
> > > + drm_object_attach_property(&connector->base,
> > > + connector->underscan_hborder_property, 0);
> > > + drm_object_attach_property(&connector->base,
> > > + connector->underscan_vborder_property, 0);
> > > +
> > > + return 0;
> > > +
> > > +err_free_hborder_prop:
> > > + drm_property_destroy(dev, connector->underscan_hborder_property);
> > > + connector->underscan_hborder_property = NULL;
> > > +
> > > +err_free_mode_prop:
> > > + drm_property_destroy(dev, connector->underscan_mode_property);
> > > + connector->underscan_mode_property = NULL;
> > > +
> > > + return -ENOMEM;
> > > +}
> > > +EXPORT_SYMBOL(drm_connector_attach_underscan_properties);
> > > +
> > > /**
> > > * drm_mode_create_scaling_mode_property - create scaling mode property
> > > * @dev: DRM device
> > > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> > > index 675cc3f8cf85..46380ee6d4ee 100644
> > > --- a/include/drm/drm_connector.h
> > > +++ b/include/drm/drm_connector.h
> > > @@ -372,6 +372,52 @@ struct drm_tv_connector_state {
> > > unsigned int hue;
> > > };
> > >
> > > +/**
> > > + * enum drm_underscan_mode - Underscan mode
> > > + *
> > > + * This enum is used to track the underscan mode.
> > > + *
> > > + * @DRM_UNDERSCAN_OFF: No underscan applied, the output image will be
> > > unchanged
> > > + * @DRM_UNDERSCAN_ON: Underscan is enabled, and horizontal/vertical
> > > border size
> > > + * are specified through the
> > > &struct_drm_underscan->hborder
> > > + * and &struct_drm_underscan->vborder fields.
> > > + * @DRM_UNDERSCAN_AUTO: Underscan is enabled and
> > > &struct_drm_underscan->hborder
> > > + * and &struct_drm_underscan->vborder are guessed
> > > by the
> > > + * driver.
> > > + */
> > > +enum drm_underscan_mode {
> > > + DRM_UNDERSCAN_OFF,
> > > + DRM_UNDERSCAN_ON,
> > > + DRM_UNDERSCAN_AUTO,
> > > +};
> > > +
> > > +/**
> > > + * struct drm_underscan - Underscan properties attached to a connector
> > > state
> > > + *
> > > + * This can be used to tell the CRTC how the image should be
> > > scaled/placed in
> > > + * order to cover fit in the display connected through this connector.
> > > Most of
> > > + * the time used to address situations where the display borders are
> > > hidden.
> > > + * Can also be used to compensate overscan done on the display side.
> > > + */
> > > +struct drm_underscan {
> >
> > I'd call this drm_underscan_state, similar to how we have
> > drm_tv_connector_state.
> >
> > > + /**
> > > + * @mode: Underscan mode.
> > > + */
> > > + enum drm_underscan_mode mode;
> > > +
> > > + /**
> > > + * @hborder: Horizontal border. This values encodes both the left and
> > > + * right borders: left_border = right_border = hborder / 2.
> > > + */
> > > + unsigned int hborder;
> > > +
> > > + /**
> > > + * @vborder: Vertical border. This values encodes both the top and
> > > + * bottom borders: top_border = bottom_border = vborder / 2.
> > > + */
> > > + unsigned int vborder;
> > > +};
> > > +
> > > /**
> > > * struct drm_connector_state - mutable connector state
> > > * @connector: backpointer to the connector
> > > @@ -429,6 +475,12 @@ struct drm_connector_state {
> > > * protection. This is most commonly used for HDCP.
> > > */
> > > unsigned int content_protection;
> > > +
> > > + /**
> > > + * @underscan: Underscan information. Most commonly used to adjust
> > > + * image when the display is doing overscan.
> > > + */
> > > + struct drm_underscan underscan;
> > > };
> > >
> > > /**
> > > @@ -892,6 +944,29 @@ struct drm_connector {
> > > */
> > > struct drm_property_blob *tile_blob_ptr;
> > >
> > > + /**
> > > + * @underscan_mode_property: Optional connector underscan mode. Used by
> > > + * the driver to scale the output image and compensate an overscan done
> > > + * on the display side.
> > > + */
> > > + struct drm_property *underscan_mode_property;
> > > +
> > > + /**
> > > + * @underscan_hborder_property: Optional connector underscan horizontal
> > > + * border (expressed in pixels). Used by the driver to adjust the
> > > + * output image position and compensate an overscan done on the display
> > > + * side.
> > > + */
> > > + struct drm_property *underscan_hborder_property;
> > > +
> > > + /**
> > > + * @underscan_hborder_property: Optional connector underscan vertical
> > > + * border (expressed in pixels). Used by the driver to adjust the
> > > + * output image position and compensate an overscan done on the display
> > > + * side.
> > > + */
> > > + struct drm_property *underscan_vborder_property;
> >
> > Since you don't allow drivers to have a per-connector value range for
> > these properties these should be in drm_mode_config I think.
I do allow that. See the max_vborder, max_hborder args in the
drm_connector_attach_underscan_properties() prototype.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
