The default delay 5 jiffies is too much when the kernel is compiled with
HZ=100 - it results in jumpy cursor in Xwindow.
In order to find out the optimal delay, I benchmarked the driver on
1280x720x30fps video. I found out that with HZ=1000, 10ms is acceptable,
but with HZ=250 or HZ=300, we need 4ms, so that the video is played
without any frame skips.
This patch changes the delay to this value.
Signed-off-by: Mikulas Patocka <mpato...@redhat.com>
Cc: sta...@vger.kernel.org
---
include/video/udlfb.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux-4.17-rc7/include/video/udlfb.h
===================================================================
--- linux-4.17-rc7.orig/include/video/udlfb.h 2018-06-03 13:17:37.000000000
+0200
+++ linux-4.17-rc7/include/video/udlfb.h 2018-06-03 13:17:37.000000000
+0200
@@ -88,7 +88,7 @@ struct dlfb_data {
#define MIN_RAW_PIX_BYTES 2
#define MIN_RAW_CMD_BYTES (RAW_HEADER_BYTES + MIN_RAW_PIX_BYTES)
-#define DL_DEFIO_WRITE_DELAY 5 /* fb_deferred_io.delay in jiffies */
+#define DL_DEFIO_WRITE_DELAY msecs_to_jiffies(HZ <= 300 ? 4 : 10) /*
optimal value for 720p video */
#define DL_DEFIO_WRITE_DISABLE (HZ*60) /* "disable" with long delay */
/* remove these once align.h patch is taken into kernel */
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
