Hi, CK:
On Wed, 2018-06-13 at 15:13 +0800, CK Hu wrote: > Hi, Stu: > > On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote: > > This patch add the connection from RDMA2 to DPI1 > > > > Signed-off-by: Stu Hsieh <stu.hs...@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > > b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > > index 31a0832ef9ec..2d883815d79c 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c > > @@ -93,9 +93,11 @@ > > #define RDMA1_MOUT_DPI0 0x2 > > #define RDMA1_MOUT_DPI1 0x3 > > #define RDMA2_MOUT_DPI0 0x2 > > +#define RDMA2_MOUT_DPI1 0x3 > > Usually, each bit of a mout register represent a output enable. Is this > value 0x3 a correct value? > > Regards, > CK > In HW CONFIG SPEC or MT2712_E2_MMSYS_Change_note show as following: Bit(s) Name Description 2:0 DISP_RDMA2_SOUT_SEL_IN 0: output to dsi0 1: outptu to dsi1 2: output to dpi0 3: output to dpi1 4: output to dsi2 5: output to dsi3 So, 0x3 is correct value. Regard, Stu > > #define DPI0_SEL_IN_RDMA1 0x1 > > #define DPI0_SEL_IN_RDMA2 0x3 > > #define DPI1_SEL_IN_RDMA1 (0x1 << 8) > > +#define DPI1_SEL_IN_RDMA2 (0x3 << 8) > > #define DSI1_SEL_IN_RDMA1 0x1 > > #define DSI2_SEL_IN_RDMA1 (0x1 << 16) > > #define DSI3_SEL_IN_RDMA1 (0x1 << 16) > > @@ -199,6 +201,9 @@ static unsigned int mtk_ddp_mout_en(enum > > mtk_ddp_comp_id cur, > > } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) { > > *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT; > > value = RDMA2_MOUT_DPI0; > > + } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) { > > + *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT; > > + value = RDMA2_MOUT_DPI1; > > } else { > > value = 0; > > } > > @@ -233,6 +238,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id > > cur, > > } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) { > > *addr = DISP_REG_CONFIG_DPI_SEL_IN; > > value = DPI0_SEL_IN_RDMA2; > > + } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) { > > + *addr = DISP_REG_CONFIG_DPI_SEL_IN; > > + value = DPI1_SEL_IN_RDMA2; > > } else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) { > > *addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN; > > value = COLOR1_SEL_IN_OVL1; > > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel