Hi, CK:
On Wed, 2018-06-13 at 16:27 +0800, CK Hu wrote:
> Hi, Stu:
>
> On Wed, 2018-06-13 at 15:56 +0800, Stu Hsieh wrote:
> > Hi, CK:
> >
> > On Wed, 2018-06-13 at 14:13 +0800, CK Hu wrote:
> > > Hi, Stu:
> > >
> > > On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> > > > This patch add the connection from RDMA1 to DPI1
> > > >
> > > > Signed-off-by: Stu Hsieh <stu.hs...@mediatek.com>
> > > > ---
> > > > drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++
> > > > 1 file changed, 8 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > > b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > > index fed1b5704355..4abd5dabeccf 100644
> > > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > > @@ -85,7 +85,9 @@
> > > > #define RDMA0_MOUT_DSI2 0x4
> > > > #define RDMA0_MOUT_DSI3 0x5
> > > > #define RDMA1_MOUT_DPI0 0x2
> > > > +#define RDMA1_MOUT_DPI1 0x3
> > >
> > > Usually, each bit of a mout register represent a output enable. Is this
> > > value 0x3 a correct value?
> > >
> > > Regards,
> > > CK
> > >
> > In HW CONFIG SPEC show as following
> >
> > Bit(s) Name Description
> > 2:0 DISP_PATH1_SOUT_SEL_IN 0 : Output to DSI0
> > 1: Ooutput to DSI1
> > 2: Ooutput to DPI
> > 3: Ooutput to DPI1
> > 4: Ooutput to DSI2
> > 5: Ooutput to DSI3
> > 6 : reserved
> > 7: Ooutput to DISP_UFOE
> >
> > So, 0x3 is correct value
>
> It looks like that RDMA1 output is also SOUT, use the naming SOUT would
> be better.
>
> Regards,
> CK
>
OK, I would change the definition name from
DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN to DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN
Regard,
STu
> >
> > Regard,
> > Stu
> >
> >
> > > > #define DPI0_SEL_IN_RDMA1 0x1
> > > > +#define DPI1_SEL_IN_RDMA1 (0x1 << 8)
> > > > #define COLOR1_SEL_IN_OVL1 0x1
> > > >
> > > > #define OVL_MOUT_EN_RDMA 0x1
> > > > @@ -171,6 +173,9 @@ static unsigned int mtk_ddp_mout_en(enum
> > > > mtk_ddp_comp_id cur,
> > > > } else if (cur == DDP_COMPONENT_RDMA1 && next ==
> > > > DDP_COMPONENT_DPI0) {
> > > > *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > > > value = RDMA1_MOUT_DPI0;
> > > > + } else if (cur == DDP_COMPONENT_RDMA1 && next ==
> > > > DDP_COMPONENT_DPI1) {
> > > > + *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > > > + value = RDMA1_MOUT_DPI1;
> > > > } else {
> > > > value = 0;
> > > > }
> > > > @@ -190,6 +195,9 @@ static unsigned int mtk_ddp_sel_in(enum
> > > > mtk_ddp_comp_id cur,
> > > > } else if (cur == DDP_COMPONENT_RDMA1 && next ==
> > > > DDP_COMPONENT_DPI0) {
> > > > *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > > > value = DPI0_SEL_IN_RDMA1;
> > > > + } else if (cur == DDP_COMPONENT_RDMA1 && next ==
> > > > DDP_COMPONENT_DPI1) {
> > > > + *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > > > + value = DPI1_SEL_IN_RDMA1;
> > > > } else if (cur == DDP_COMPONENT_OVL1 && next ==
> > > > DDP_COMPONENT_COLOR1) {
> > > > *addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
> > > > value = COLOR1_SEL_IN_OVL1;
> > >
> > >
> >
> >
>
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
