Dne torek, 12. junij 2018 ob 22:00:29 CEST je Jernej Skrabec napisal(a): > DW HDMI PHY driver and PHY clock driver share same registers. Make sure > that DW HDMI PHY setup code doesn't change any clock related bits and > set them to 0 during initialization. > > Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net> > --- > drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 2 +- > drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 12 +++++++++++- > 2 files changed, 12 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h > b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h index 79154f0f674a..3ba71aff92fc > 100644 > --- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h > +++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h > @@ -98,7 +98,7 @@ > #define SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN BIT(29) > #define SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN BIT(28) > #define SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33 BIT(27) > -#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL BIT(26) > +#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK BIT(26) > #define SUN8I_HDMI_PHY_PLL_CFG1_PLLEN BIT(25) > #define SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(x) ((x) << 22) > #define SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(x) ((x) << 20) > diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c > b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index 966688f04741..cd07ceb71601 > 100644 > --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c > +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c > @@ -183,7 +183,13 @@ static int sun8i_hdmi_phy_config_h3(struct dw_hdmi > *hdmi, regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG, > SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK, 0); > > - regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, pll_cfg1_init); > + /* > + * NOTE: We have to be careful not to overwrite PHY parent > + * clock selection bit and clock divider. > + */ > + regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, > + (u32)~SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK, > + pll_cfg1_init); > regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG, > (u32)~SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK, > pll_cfg2_init); > @@ -352,6 +358,10 @@ static void sun8i_hdmi_phy_init_h3(struct > sun8i_hdmi_phy *phy) SUN8I_HDMI_PHY_ANA_CFG3_SCLEN | > SUN8I_HDMI_PHY_ANA_CFG3_SDAEN); > > + /* reset PLL clock configuration */ > + regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, 0); > + regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG, 0); > +
For some reason, this change breaks HDMI on H3. Clearing only PLL parent selection bit works ok, though. I'll fix it in next revision. Best regards, Jernej > /* set HW control of CEC pins */ > regmap_write(phy->regs, SUN8I_HDMI_PHY_CEC_REG, 0); _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
