The bridge loses its hw state when the cable is unplugged. If we detect
this case in the hpd handler, reset its state.
Reported-by: Rob Clark <robdcl...@gmail.com>
Signed-off-by: Sean Paul <seanp...@chromium.org>
---
This is the follow-up to "drm/msm: Disable mdp5 crtc when there are no
active planes". I incorrectly assumed the modeset was required from the
msm side, but Rob pointed out that he thought it might be a bridge
issue.
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 73021b388e12..dd3ff2f2cdce 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -429,6 +429,18 @@ static void adv7511_hpd_work(struct work_struct *work)
else
status = connector_status_disconnected;
+ /*
+ * The bridge resets its registers on unplug. So when we get a plug
+ * event and we're already supposed to be powered, cycle the bridge to
+ * restore its state.
+ */
+ if (status == connector_status_connected &&
+ adv7511->connector.status == connector_status_disconnected &&
+ adv7511->powered) {
+ regcache_mark_dirty(adv7511->regmap);
+ adv7511_power_on(adv7511);
+ }
+
if (adv7511->connector.status != status) {
adv7511->connector.status = status;
if (status == connector_status_disconnected)
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
