From: Deepak Rawat <dra...@vmware.com>
Call the same display memory validation function which is used by
modeset_check. This ensure consistency that kernel change preferred
mode/topology only if supported.
Also change the internal function to use drm_rect instead of
drm_vmw_rect.
Signed-off-by: Deepak Rawat <dra...@vmware.com>
Reviewed-by: Thomas Hellstrom <thellst...@vmware.com>
Signed-off-by: Thomas Hellstrom <thellst...@vmware.com>
---
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 120 ++++++++++++----------------
1 file changed, 51 insertions(+), 69 deletions(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index a7c9a017fc3c..387bb39de839 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -1968,13 +1968,15 @@ void vmw_disable_vblank(struct drm_device *dev,
unsigned int pipe)
{
}
-
-/*
- * Small shared kms functions.
+/**
+ * vmw_du_update_layout - Update the display unit with topology from resolution
+ * plugin and generate DRM uevent
+ * @dev_priv: device private
+ * @num_rects: number of drm_rect in rects
+ * @rects: toplogy to update
*/
-
-static int vmw_du_update_layout(struct vmw_private *dev_priv, unsigned num,
- struct drm_vmw_rect *rects)
+static int vmw_du_update_layout(struct vmw_private *dev_priv,
+ unsigned int num_rects, struct drm_rect *rects)
{
struct drm_device *dev = dev_priv->dev;
struct vmw_display_unit *du;
@@ -1982,26 +1984,14 @@ static int vmw_du_update_layout(struct vmw_private
*dev_priv, unsigned num,
mutex_lock(&dev->mode_config.mutex);
-#if 0
- {
- unsigned int i;
-
- DRM_INFO("%s: new layout ", __func__);
- for (i = 0; i < num; i++)
- DRM_INFO("(%i, %i %ux%u) ", rects[i].x, rects[i].y,
- rects[i].w, rects[i].h);
- DRM_INFO("\n");
- }
-#endif
-
list_for_each_entry(con, &dev->mode_config.connector_list, head) {
du = vmw_connector_to_du(con);
- if (num > du->unit) {
- du->pref_width = rects[du->unit].w;
- du->pref_height = rects[du->unit].h;
+ if (num_rects > du->unit) {
+ du->pref_width = drm_rect_width(&rects[du->unit]);
+ du->pref_height = drm_rect_height(&rects[du->unit]);
du->pref_active = true;
- du->gui_x = rects[du->unit].x;
- du->gui_y = rects[du->unit].y;
+ du->gui_x = rects[du->unit].x1;
+ du->gui_y = rects[du->unit].y1;
drm_object_property_set_value
(&con->base, dev->mode_config.suggested_x_property,
du->gui_x);
@@ -2322,7 +2312,25 @@ vmw_du_connector_atomic_get_property(struct
drm_connector *connector,
return 0;
}
-
+/**
+ * vmw_kms_update_layout_ioctl - Handler for DRM_VMW_UPDATE_LAYOUT ioctl
+ * @dev: drm device for the ioctl
+ * @data: data pointer for the ioctl
+ * @file_priv: drm file for the ioctl call
+ *
+ * Update preferred topology of display unit as per ioctl request. The topology
+ * is expressed as array of drm_vmw_rect.
+ * e.g.
+ * [0 0 640 480] [640 0 800 600] [0 480 640 480]
+ *
+ * NOTE:
+ * The x and y offset (upper left) in drm_vmw_rect cannot be less than 0.
Beside
+ * device limit on topology, x + w and y + h (lower right) cannot be greater
+ * than INT_MAX. So topology beyond these limits will return with error.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
@@ -2331,15 +2339,12 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev,
void *data,
(struct drm_vmw_update_layout_arg *)data;
void __user *user_rects;
struct drm_vmw_rect *rects;
+ struct drm_rect *drm_rects;
unsigned rects_size;
- int ret;
- int i;
- u64 total_pixels = 0;
- struct drm_mode_config *mode_config = &dev->mode_config;
- struct drm_vmw_rect bounding_box = {0};
+ int ret, i;
if (!arg->num_outputs) {
- struct drm_vmw_rect def_rect = {0, 0, 800, 600};
+ struct drm_rect def_rect = {0, 0, 800, 600};
vmw_du_update_layout(dev_priv, 1, &def_rect);
return 0;
}
@@ -2358,52 +2363,29 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev,
void *data,
goto out_free;
}
- for (i = 0; i < arg->num_outputs; ++i) {
- if (rects[i].x < 0 ||
- rects[i].y < 0 ||
- rects[i].x + rects[i].w > mode_config->max_width ||
- rects[i].y + rects[i].h > mode_config->max_height) {
- DRM_ERROR("Invalid GUI layout.\n");
- ret = -EINVAL;
- goto out_free;
- }
-
- /*
- * bounding_box.w and bunding_box.h are used as
- * lower-right coordinates
- */
- if (rects[i].x + rects[i].w > bounding_box.w)
- bounding_box.w = rects[i].x + rects[i].w;
-
- if (rects[i].y + rects[i].h > bounding_box.h)
- bounding_box.h = rects[i].y + rects[i].h;
+ drm_rects = (struct drm_rect *)rects;
- total_pixels += (u64) rects[i].w * (u64) rects[i].h;
- }
+ for (i = 0; i < arg->num_outputs; i++) {
+ struct drm_vmw_rect curr_rect;
- if (dev_priv->active_display_unit == vmw_du_screen_target) {
- /*
- * For Screen Targets, the limits for a toplogy are:
- * 1. Bounding box (assuming 32bpp) must be < prim_bb_mem
- * 2. Total pixels (assuming 32bpp) must be < prim_bb_mem
- */
- u64 bb_mem = (u64) bounding_box.w * bounding_box.h * 4;
- u64 pixel_mem = total_pixels * 4;
-
- if (bb_mem > dev_priv->prim_bb_mem) {
- DRM_ERROR("Topology is beyond supported limits.\n");
- ret = -EINVAL;
+ /* Verify user-space for overflow as kernel use drm_rect */
+ if ((rects[i].x + rects[i].w > INT_MAX) ||
+ (rects[i].y + rects[i].h > INT_MAX)) {
+ ret = -ERANGE;
goto out_free;
}
- if (pixel_mem > dev_priv->prim_bb_mem) {
- DRM_ERROR("Combined output size too large\n");
- ret = -EINVAL;
- goto out_free;
- }
+ curr_rect = rects[i];
+ drm_rects[i].x1 = curr_rect.x;
+ drm_rects[i].y1 = curr_rect.y;
+ drm_rects[i].x2 = curr_rect.x + curr_rect.w;
+ drm_rects[i].y2 = curr_rect.y + curr_rect.h;
}
- vmw_du_update_layout(dev_priv, arg->num_outputs, rects);
+ ret = vmw_kms_check_display_memory(dev, arg->num_outputs, drm_rects);
+
+ if (ret == 0)
+ vmw_du_update_layout(dev_priv, arg->num_outputs, drm_rects);
out_free:
kfree(rects);
--
2.18.0.rc1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
