From: Jeykumar Sankaran <jsa...@codeaurora.org>

Adds mdp transfer time to msm dsi binding

Signed-off-by: Jeykumar Sankaran <jsa...@codeaurora.org>
Signed-off-by: Rajesh Yadav <rya...@codeaurora.org>
Signed-off-by: Sean Paul <seanp...@chromium.org>
---
 .../devicetree/bindings/display/msm/dsi.txt      | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt 
b/Documentation/devicetree/bindings/display/msm/dsi.txt
index 518e9cdf0d4b..d22237a88eae 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -121,6 +121,20 @@ Required properties:
 Optional properties:
 - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
   regulator is wanted.
+- qcom,mdss-mdp-transfer-time-us:      Specifies the dsi transfer time for 
command mode
+                                       panels in microseconds. Driver uses 
this number to adjust
+                                       the clock rate according to the 
expected transfer time.
+                                       Increasing this value would slow down 
the mdp processing
+                                       and can result in slower performance.
+                                       Decreasing this value can speed up the 
mdp processing,
+                                       but this can also impact power 
consumption.
+                                       As a rule this time should not be 
higher than the time
+                                       that would be expected with the 
processing at the
+                                       dsi link rate since anyways this would 
be the maximum
+                                       transfer time that could be achieved.
+                                       If ping pong split is enabled, this 
time should not be higher
+                                       than two times the dsi link rate time.
+                                       If the property is not specified, then 
the default value is 14000 us.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/graph.txt
@@ -171,6 +185,8 @@ Example:
                qcom,master-dsi;
                qcom,sync-dual-dsi;
 
+               qcom,mdss-mdp-transfer-time-us = <12000>;
+
                pinctrl-names = "default", "sleep";
                pinctrl-0 = <&dsi_active>;
                pinctrl-1 = <&dsi_suspend>;
-- 
Sean Paul, Software Engineer, Google / Chromium OS

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to