On 2018-08-04 13:14, Peter Rosin wrote:
> This beats the heuristic that the connector is involved in what format
> should be output for cases where this fails.

Sorry to reply to self, but...

> E.g. if there is a bridge that changes format between the encoder and the
> connector, or if some of the RGB pins between the lcd controller and the
> encoder are not routed on the PCB.
> 
> This is critical for the devices that have the "conflicting output
> formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant
> RGB bits move around depending on the selected output mode. For
> devices that do not have the "conflicting output formats" issue
> (SAMA5D2, SAMA5D4), this is completely irrelevant.
> 
> Acked-by: Boris Brezillon <boris.brezil...@bootlin.com>
> Reviewed-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
> Signed-off-by: Peter Rosin <p...@axentia.se>
> ---
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c   | 70 
> +++++++++++++++++-------
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h     |  1 +
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 70 
> +++++++++++++++++++++---
>  3 files changed, 114 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c 
> b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> index d73281095fac..c38a479ada98 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -226,6 +226,55 @@ static void atmel_hlcdc_crtc_atomic_enable(struct 
> drm_crtc *c,
>  #define ATMEL_HLCDC_RGB888_OUTPUT    BIT(3)
>  #define ATMEL_HLCDC_OUTPUT_MODE_MASK GENMASK(3, 0)
>  
> +static int atmel_hlcdc_connector_output_mode(struct drm_connector_state 
> *state)
> +{
> +     struct drm_connector *connector = state->connector;
> +     struct drm_display_info *info = &connector->display_info;
> +     struct drm_encoder *encoder;
> +     unsigned int supported_fmts = 0;
> +     int j;
> +
> +     encoder = state->best_encoder;
> +     if (!encoder)
> +             encoder = connector->encoder;
> +
> +     switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
> +     case 0:
> +             break;
> +     case MEDIA_BUS_FMT_RGB444_1X12:
> +             return ATMEL_HLCDC_RGB444_OUTPUT;
> +     case MEDIA_BUS_FMT_RGB565_1X16:
> +             return ATMEL_HLCDC_RGB565_OUTPUT;
> +     case MEDIA_BUS_FMT_RGB666_1X18:
> +             return ATMEL_HLCDC_RGB666_OUTPUT;
> +     case MEDIA_BUS_FMT_RGB888_1X24:
> +             return ATMEL_HLCDC_RGB888_OUTPUT;
> +     default:
> +             return -EINVAL;
> +     }
> +
> +     for (j = 0; j < info->num_bus_formats; j++) {
> +             switch (info->bus_formats[j]) {
> +             case MEDIA_BUS_FMT_RGB444_1X12:
> +                     supported_fmts |= ATMEL_HLCDC_RGB444_OUTPUT;
> +                     break;
> +             case MEDIA_BUS_FMT_RGB565_1X16:
> +                     supported_fmts |= ATMEL_HLCDC_RGB565_OUTPUT;
> +                     break;
> +             case MEDIA_BUS_FMT_RGB666_1X18:
> +                     supported_fmts |= ATMEL_HLCDC_RGB666_OUTPUT;
> +                     break;
> +             case MEDIA_BUS_FMT_RGB888_1X24:
> +                     supported_fmts |= ATMEL_HLCDC_RGB888_OUTPUT;
> +                     break;
> +             default:
> +                     break;
> +             }
> +     }
> +
> +     return supported_fmts;
> +}
> +
>  static int atmel_hlcdc_crtc_select_output_mode(struct drm_crtc_state *state)
>  {
>       unsigned int output_fmts = ATMEL_HLCDC_OUTPUT_MODE_MASK;
> @@ -238,31 +287,12 @@ static int atmel_hlcdc_crtc_select_output_mode(struct 
> drm_crtc_state *state)
>       crtc = drm_crtc_to_atmel_hlcdc_crtc(state->crtc);
>  
>       for_each_new_connector_in_state(state->state, connector, cstate, i) {
> -             struct drm_display_info *info = &connector->display_info;
>               unsigned int supported_fmts = 0;
> -             int j;
>  
>               if (!cstate->crtc)
>                       continue;
>  
> -             for (j = 0; j < info->num_bus_formats; j++) {
> -                     switch (info->bus_formats[j]) {
> -                     case MEDIA_BUS_FMT_RGB444_1X12:
> -                             supported_fmts |= ATMEL_HLCDC_RGB444_OUTPUT;
> -                             break;
> -                     case MEDIA_BUS_FMT_RGB565_1X16:
> -                             supported_fmts |= ATMEL_HLCDC_RGB565_OUTPUT;
> -                             break;
> -                     case MEDIA_BUS_FMT_RGB666_1X18:
> -                             supported_fmts |= ATMEL_HLCDC_RGB666_OUTPUT;
> -                             break;
> -                     case MEDIA_BUS_FMT_RGB888_1X24:
> -                             supported_fmts |= ATMEL_HLCDC_RGB888_OUTPUT;
> -                             break;
> -                     default:
> -                             break;
> -                     }
> -             }
> +             supported_fmts = atmel_hlcdc_connector_output_mode(cstate);
>  
>               if (crtc->dc->desc->conflicting_output_formats)
>                       output_fmts &= supported_fmts;
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h 
> b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> index 60c937f42114..4cc1e03f0aee 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> @@ -441,5 +441,6 @@ void atmel_hlcdc_crtc_irq(struct drm_crtc *c);
>  int atmel_hlcdc_crtc_create(struct drm_device *dev);
>  
>  int atmel_hlcdc_create_outputs(struct drm_device *dev);
> +int atmel_hlcdc_encoder_get_bus_fmt(struct drm_encoder *encoder);
>  
>  #endif /* DRM_ATMEL_HLCDC_H */
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c 
> b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
> index 8db51fb131db..f587ae596791 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
> @@ -27,33 +27,89 @@
>  
>  #include "atmel_hlcdc_dc.h"
>  
> +struct atmel_hlcdc_rgb_output {
> +     struct drm_encoder encoder;
> +     int bus_fmt;
> +};
> +
>  static const struct drm_encoder_funcs atmel_hlcdc_panel_encoder_funcs = {
>       .destroy = drm_encoder_cleanup,
>  };
>  
> +static struct atmel_hlcdc_rgb_output *
> +atmel_hlcdc_encoder_to_rgb_output(struct drm_encoder *encoder)
> +{
> +     return container_of(encoder, struct atmel_hlcdc_rgb_output, encoder);
> +}
> +
> +int atmel_hlcdc_encoder_get_bus_fmt(struct drm_encoder *encoder)
> +{
> +     struct atmel_hlcdc_rgb_output *output;
> +
> +     output = atmel_hlcdc_encoder_to_rgb_output(encoder);
> +
> +     return output->bus_fmt;
> +}
> +
> +static int atmel_hlcdc_of_bus_fmt(struct device_node *ep)
> +{
> +     u32 bus_width;
> +     int ret;
> +
> +     ret = of_property_read_u32(ep, "bus-width", &bus_width);
> +     if (ret == -EINVAL)
> +             return 0;
> +     if (ret)
> +             return ret;
> +
> +     switch (bus_width) {
> +     case 12:
> +             return MEDIA_BUS_FMT_RGB444_1X12;
> +     case 16:
> +             return MEDIA_BUS_FMT_RGB565_1X16;
> +     case 18:
> +             return MEDIA_BUS_FMT_RGB666_1X18;
> +     case 24:
> +             return MEDIA_BUS_FMT_RGB888_1X24;
> +     default:
> +             return -EINVAL;
> +     }
> +}
> +
>  static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, int endpoint)
>  {
> -     struct drm_encoder *encoder;
> +     struct atmel_hlcdc_rgb_output *output;
> +     struct device_node *ep;
>       struct drm_panel *panel;
>       struct drm_bridge *bridge;
>       int ret;
>  
> +     ep = of_graph_get_endpoint_by_regs(dev->dev->of_node, 0, endpoint);


...I just noticed that the ep device_node is never put away...

> +     if (!ep)
> +             return -ENODEV;
> +
>       ret = drm_of_find_panel_or_bridge(dev->dev->of_node, 0, endpoint,
>                                         &panel, &bridge);
>       if (ret)
>               return ret;
>  
> -     encoder = devm_kzalloc(dev->dev, sizeof(*encoder), GFP_KERNEL);
> -     if (!encoder)
> +     output = devm_kzalloc(dev->dev, sizeof(*output), GFP_KERNEL);
> +     if (!output)
>               return -EINVAL;

...and this should be -ENOMEM. Not that this latter buglet is a problem
with this series, but since I noticed it and am going to resend anyway
I'm going to fix that too.

Cheers,
Peter

>  
> -     ret = drm_encoder_init(dev, encoder,
> +     output->bus_fmt = atmel_hlcdc_of_bus_fmt(ep);
> +     if (output->bus_fmt < 0) {
> +             dev_err(dev->dev, "invalid bus width\n");
> +             return -EINVAL;
> +     }
> +
> +     ret = drm_encoder_init(dev, &output->encoder,
>                              &atmel_hlcdc_panel_encoder_funcs,
>                              DRM_MODE_ENCODER_NONE, NULL);
>       if (ret)
>               return ret;
>  
> -     encoder->possible_crtcs = 0x1;
> +     output->encoder.possible_crtcs = 0x1;
>  
>       if (panel) {
>               bridge = drm_panel_bridge_add(panel, 
> DRM_MODE_CONNECTOR_Unknown);
> @@ -62,7 +118,7 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device 
> *dev, int endpoint)
>       }
>  
>       if (bridge) {
> -             ret = drm_bridge_attach(encoder, bridge, NULL);
> +             ret = drm_bridge_attach(&output->encoder, bridge, NULL);
>               if (!ret)
>                       return 0;
>  
> @@ -70,7 +126,7 @@ static int atmel_hlcdc_attach_endpoint(struct drm_device 
> *dev, int endpoint)
>                       drm_panel_bridge_remove(bridge);
>       }
>  
> -     drm_encoder_cleanup(encoder);
> +     drm_encoder_cleanup(&output->encoder);
>  
>       return ret;
>  }
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to