Got it. -depends on EXTCON=y || (EXTCON=m && DRM_ROCKCHIP=m) +depends on DRM_ROCKCHIP=m +select EXTCON
Damian -----Original Message----- From: Heiko Stuebner <he...@sntech.de> Sent: Thursday, September 13, 2018 14:32 To: Damian Kos <d...@cadence.com> Cc: David Airlie <airl...@linux.ie>; Rob Herring <robh...@kernel.org>; Mark Rutland <mark.rutl...@arm.com>; Archit Taneja <arch...@codeaurora.org>; Andrzej Hajda <a.ha...@samsung.com>; Laurent Pinchart <laurent.pinch...@ideasonboard.com>; Gustavo Padovan <gust...@padovan.org>; Maarten Lankhorst <maarten.lankho...@linux.intel.com>; Sean Paul <s...@poorly.run>; Sandy Huang <h...@rock-chips.com>; Quentin Schulz <quentin.sch...@bootlin.com>; dri-devel@lists.freedesktop.org; devicet...@vger.kernel.org; linux-ker...@vger.kernel.org; linux-arm-ker...@lists.infradead.org; linux-rockc...@lists.infradead.org; Przemyslaw Gaj <p...@cadence.com>; Lukasz Tyrala <ltyr...@cadence.com>; Scott Telford <stelf...@cadence.com>; Artur Jedrysek <jar...@cadence.com>; Piotr Sroka <pio...@cadence.com> Subject: Re: [PATCH v3 0/5] drm: add support for Cadence MHDP DPI/DP bridge. EXTERNAL MAIL Am Dienstag, 28. August 2018, 12:24:43 CEST schrieb Damian Kos: > Hello! > > This is the series of patches that will add support for the Cadence's > DPI/DP bridge. Please note that this is a preliminary version of the > driver and there will be more patches in the future with updates, fixes and > improvements. > Please keep that in mind when looking at FIXME/TODO/XXX comments. > > Initially, MHDP driver was developed as a DRM bridge driver and was > planed to be placed in drivers/gpu/drm/bridge/mhdp.c. However, there > was already a driver for Cadence's DP controller developed by > RockChip, but that driver uses the different DRM framework and looks like a > part of a bigger system. > Both controllers (including firmware) are quite different internally > (MST/FEC/DSC support, link training done by driver, additional > commands, IRQ's > etc.) but they have similar register map, except for Framer/Streamer > (which is noticeably different), so they appear similar. > > The following patches contain: > - Moving common code to drivers/gpu/drm/bridge/cdns-mhdp-common.* and > modifying it a bit (mostly new prefixes for functions and data types) so it > can be used by two, higher level, drivers. > - Modifying existing RockChip's DP driver to use the common code after changes > made to it (use the new cdns_mhdp_device structure and new function names). > - Modifying DRM helpers a bit. Some are required for new driver, some are > updates from DP 1.2 to 1.3 or 1.4. > - Adding documentation for device tree bindings. > - Adding preliminary Cadence DPI/DP bridge driver. > > Some of the things that will be added later on include (but are not > limited > to): > - Support for Cadence SD0801 PHY (PHY's driver should be on the way by > now) > - MST support > - DSC support > - FEC support > - HDCP support with te Kconfig issue in patch5 fixed, this series tested on rk3288 (analogix-dp) and rk3399 (analogix-dp + cadence-dp) Everything seems to work that worked before. Tested-by: Heiko Stuebner <he...@sntech.de> _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel