Hi Simon,
On Wednesday, 19 September 2018 11:35:07 EEST Simon Horman wrote:
> On Mon, Sep 17, 2018 at 11:59:32AM +0300, Laurent Pinchart wrote:
> > On Monday, 17 September 2018 11:54:04 EEST Laurent Pinchart wrote:
> >> On Monday, 17 September 2018 11:47:15 EEST Laurent Pinchart wrote:
> >>> On Monday, 17 September 2018 11:14:20 EEST Simon Horman wrote:
> >>>> On Mon, Sep 17, 2018 at 09:50:55AM +0200, Simon Horman wrote:
> >>>>> On Fri, Sep 14, 2018 at 12:10:43PM +0300, Laurent Pinchart wrote:
> >>>>>> The R8A77990 (E3) platform has one RGB output and two LVDS
> >>>>>> outputs connected to the DU. Add the DT nodes for the DU, LVDS
> >>>>>> encoders and supporting VSP and FCP.
> >>>>>>
> >>>>>> Signed-off-by: Laurent Pinchart
> >>>>>> <laurent.pinchart+rene...@ideasonboard.com>
> >>>>>> Tested-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
> >>>>>> ---
> >>>>>>
> >>>>>> arch/arm64/boot/dts/renesas/r8a77990.dtsi | 167 ++++++++++++++++++++
> >>>>>> 1 file changed, 167 insertions(+)
> >>>>>>
> >>>>>> diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> >>>>>> b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index
> >>>>>> abb14af76c0e..600074ca3ee5 100644
> >>>>>> --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> >>>>>> +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
[snip]
> >>>>>> + lvds0: lvds-encoder@feb90000 {
> >>>>>> + compatible = "renesas,r8a77990-lvds";
> >>>>>> + reg = <0 0xfeb90000 0 0x20>;
> >>>>>> + clocks = <&cpg CPG_MOD 727>;
> >>>>>> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> >>>>>> + resets = <&cpg 727>;
> >>>>>> + status = "disabled";
> >>>>>> +
> >>>>>> + ports {
> >>>>>> + #address-cells = <1>;
> >>>>>> + #size-cells = <0>;
> >>>>>> +
> >>>>>> + port@0 {
> >>>>>> + reg = <0>;
> >>>>>> + lvds0_in: endpoint {
> >>>>>> + remote-endpoint =
> >>>>>> <&du_out_lvds0>;
> >>>>>> + };
> >>>>>> + };
> >>>>>> +
> >>>>>> + port@1 {
> >>>>>> + reg = <1>;
> >>>>>> + lvds0_out: endpoint {
> >>>>>> + };
> >>>>>> + };
> >>>>>> + };
> >>>>>> + };
> >>>>>> +
> >>>>>> + lvds1: lvds-encoder@feb90100 {
> >>>>>> + compatible = "renesas,r8a77990-lvds";
> >>>>>> + reg = <0 0xfeb90100 0 0x20>;
> >>>>>> + clocks = <&cpg CPG_MOD 727>;
> >>>>>> + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> >>>>>> + resets = <&cpg 726>;
> >>>>
> >>>> Also, is the missmatch between the index for the clock and reset
> >>>> intentional?
> >>>
> >>> It is. According to the datasheet, the two LVDS encoders have
> >>> different module stop bits, but share the same reset (lovely hardware
> >>> design, it will be fun to support that in the driver :-S).
> >>
> >> Sorry, I got it wrong. it's bit 725 that is shared between the two LVDS
> >> encoders, to reset the two LVDS PLLs together. The encoders themselves
> >> still have independent reset bits. I'll fix this.
> >
> > And of course it's the clock you were commenting on, not the reset. *sigh*
> >
> > According to the datasheets the two LVDS encoders share one MSTP. Whether
> > that's a mistake in the documentation or not I can't tell yet, as I have
> > only tested LVDS0.
>
> Could we follow-up with the HW team?
> I'm not opposed to taking the patch with this portion as-is
> but it would be good to clarify this somehow.
I tried setting the clock to MSTP 726, and I then get vblank interrupt
timeouts. Furthermore I've now tested the LVDS1 output with a display panel,
and while I still can't get the backlight to work, the panel displays the
correct image with MSTP 727. I thus conclude that the above is correct.
> >>>>>> + status = "disabled";
> >>>>>> +
> >>>>>> + ports {
> >>>>>> + #address-cells = <1>;
> >>>>>> + #size-cells = <0>;
> >>>>>> +
> >>>>>> + port@0 {
> >>>>>> + reg = <0>;
> >>>>>> + lvds1_in: endpoint {
> >>>>>> + remote-endpoint =
> >>>>>> <&du_out_lvds1>;
> >>>>>> + };
> >>>>>> + };
> >>>>>> +
> >>>>>> + port@1 {
> >>>>>> + reg = <1>;
> >>>>>> + lvds1_out: endpoint {
> >>>>>> + };
> >>>>>> + };
> >>>>>> + };
> >>>>>> + };
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
