On Wed, Oct 17, 2018 at 06:34:00PM +0530, Sharat Masetty wrote:
> Moving this to resume helps with both GPU DCVS and the performance
> sampling. For GPU DCVS this makes sure that the frequency does not scale
> when there are no GPU submissions. In the case of performance profiling,
> the GPU is UP, but its possible that the hw_init() was not called yet,
> so we need this to get sane perf values in all cases.

This description is worded oddly to me but I think the gist is that you
want the counters running before you start sampling. I agree which is why I
think that the /* FIXME: */ is right and this should go into in the GMU code
(a6xx_rpmh_start to be exact). The timing should still work out and the GMU code
can stay with the GMU code which is always a bonus.

> Signed-off-by: Sharat Masetty <smase...@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c 
> b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index c0cd3ac..2c52b7c 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -387,14 +387,6 @@ static int a6xx_hw_init(struct msm_gpu *gpu)
>       /* Select CP0 to always count cycles */
>       gpu_write(gpu, REG_A6XX_CP_PERFCTR_CP_SEL_0, PERF_CP_ALWAYS_COUNT);
>  
> -     /* FIXME: not sure if this should live here or in a6xx_gmu.c */
> -     gmu_write(&a6xx_gpu->gmu,  REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_MASK,
> -             0xff000000);
> -     gmu_rmw(&a6xx_gpu->gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_SELECT_0,
> -             0xff, 0x20);
> -     gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_ENABLE,
> -             0x01);
> -
>       gpu_write(gpu, REG_A6XX_RB_NC_MODE_CNTL, 2 << 1);
>       gpu_write(gpu, REG_A6XX_TPL1_NC_MODE_CNTL, 2 << 1);
>       gpu_write(gpu, REG_A6XX_SP_NC_MODE_CNTL, 2 << 1);
> @@ -655,6 +647,14 @@ static int a6xx_pm_resume(struct msm_gpu *gpu)
>  
>       gpu->needs_hw_init = true;
>  
> +     /* FIXME: not sure if this should live here or in a6xx_gmu.c */

If in case you don't move this,  this line needs to go away.

> +     gmu_write(&a6xx_gpu->gmu,  REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_MASK,
> +             0xff000000);
> +     gmu_rmw(&a6xx_gpu->gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_SELECT_0,
> +             0xff, 0x20);
> +     gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_ENABLE,
> +             0x01);
> +
>       msm_gpu_resume_devfreq(gpu);
>  
>       return ret;
> -- 
> 1.9.1
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to