The ANX6345 is an ultra-low power DisplayPort/eDP transmitter designed for portable devices.
Add a binding document for it. Signed-off-by: Icenowy Zheng <icen...@aosc.io> --- .../bindings/display/bridge/anx6345.txt | 39 +++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.txt diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.txt b/Documentation/devicetree/bindings/display/bridge/anx6345.txt new file mode 100644 index 000000000000..0689d4eb5f65 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.txt @@ -0,0 +1,39 @@ +Analogix ANX6345 eDP Transmitter +-------------------------------- + +The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for +portable devices. + +Required properties: + + - compatible : "analogix,anx6345" + - reg : I2C address of the device + - reset-gpios : Which GPIO to use for reset + +Optional properties: + + - dvdd12-supply : Regulator for 1.2V digital core power. + - dvdd25-supply : Regulator for 2.5V digital core power. + - panel-supply : Regulator for the power of the panel. + - edid : verbatim EDID data block describing attached + panel, only used when the panel has no EDID info. + - Video port for RGB input, using the DT bindings defined in [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + +anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + panel-supply = <®_dc1sw>; + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_fldo1>; + + port { + anx6345_in: endpoint { + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; +}; -- 2.18.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel