tc358767 driver sets the connector type always to eDP.
This patch sets the type to DP if there is no panel defined, which
implies that there's a DP connector on the board.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
---
drivers/gpu/drm/bridge/tc358767.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c
b/drivers/gpu/drm/bridge/tc358767.c
index be013bd7b30b..db93d927cb9a 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1207,7 +1207,8 @@ static int tc_bridge_attach(struct drm_bridge *bridge)
/* Create eDP connector */
drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
- DRM_MODE_CONNECTOR_eDP);
+ tc->panel ? DRM_MODE_CONNECTOR_eDP :
+ DRM_MODE_CONNECTOR_DisplayPort);
if (ret)
return ret;
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
