On Tue, Nov 06, 2018 at 04:31:19PM -0800, Anusha Srivatsa wrote:
> For DP 1.4 and above, Display Stream compression can be
> enabled only if Forward Error Correctin can be performed.
>
> Add a crtc state for FEC. Currently, the state
> is determined by platform, DP and DSC being
> enabled. Moving forward we can use the state
> to have error correction on other scenarios too
> if needed.
>
> v2:
> - Control compression_enable with the fec_enable
> parameter in crtc state and with intel_dp_supports_fec()
> (Ville)
>
> - intel_dp_can_fec()/intel_dp_supports_fec()(manasi)
>
> v3: Check for FEC support along with setting crtc state.
>
> v4: add checks to intel_dp_source_supports_dsc.(manasi)
> - Move intel_dp_supports_fec() closer to
> intel_dp_supports_dsc() (Anusha)
>
> v5: Move fec check to intel_dp_supports_dsc(Ville)
>
> v6: Remove warning. rebase.
>
> v7: change crtc state to include DP sink and fec capability
> of source.(Manasi)
>
> Suggested-by: Ville Syrjala <ville.syrj...@linux.intel.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
> Cc: Jani Nikula <jani.nik...@linux.intel.com>
> Cc: Manasi Navare <manasi.d.nav...@intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.sriva...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 31 +++++++++++++++++++++++++++++--
> drivers/gpu/drm/i915/intel_drv.h | 3 +++
> 2 files changed, 32 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 73c00c5acf14..f764c45deaab 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -545,7 +545,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> dsc_slice_count =
>
> drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
> true);
> - } else {
> + } else if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) {
> dsc_max_output_bpp =
> intel_dp_dsc_get_output_bpp(max_link_clock,
> max_lanes,
> @@ -1710,12 +1710,27 @@ struct link_config_limits {
> int min_bpp, max_bpp;
> };
>
> +static bool intel_dp_source_supports_fec(struct intel_dp *intel_dp,
> + const struct intel_crtc_state
> *pipe_config)
> +{
> + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> + struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
> +
> + return INTEL_GEN(dev_priv) >= 11 && pipe_config->cpu_transcoder !=
> TRANSCODER_A;
> +}
> +
> +static bool intel_dp_supports_fec(struct intel_dp *intel_dp,
> + const struct intel_crtc_state *pipe_config)
> +{
> + return intel_dp_source_supports_fec(intel_dp, pipe_config) &&
> + drm_dp_sink_supports_fec(intel_dp->fec_capable);
> +}
> +
> static bool intel_dp_source_supports_dsc(struct intel_dp *intel_dp,
> const struct intel_crtc_state
> *pipe_config)
> {
> struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
>
> - /* FIXME: FEC needed for external DP until then reject DSC on DP */
> if (!intel_dp_is_edp(intel_dp))
> return false;
No point in keeping this !edp condition here, thats supposed to go with FEC
check,
move that to where fec_supports is added.
>
> @@ -1726,6 +1741,9 @@ static bool intel_dp_source_supports_dsc(struct
> intel_dp *intel_dp,
> static bool intel_dp_supports_dsc(struct intel_dp *intel_dp,
> const struct intel_crtc_state *pipe_config)
> {
> + if (!pipe_config->fec_enable)
> + return false;
I think its better to use intel_dp_supports_fec(intel_dp, pipe_config) && !edp
instead
of pipe_config->fec_enable because pipe_config->fec_enable state will be set
only in dp_compute_config
> +
> if (!intel_dp_source_supports_dsc(intel_dp, pipe_config) ||
> !drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd))
> return false;
> @@ -1886,9 +1904,18 @@ static bool intel_dp_dsc_compute_config(struct
> intel_dp *intel_dp,
> u16 dsc_max_output_bpp = 0;
> u8 dsc_dp_slice_count = 0;
>
> + pipe_config->fec_enable = !intel_dp_is_edp(intel_dp) &&
> + intel_dp_supports_fec(intel_dp, pipe_config);
Why is pipe_config->fec_enable set in dsc_compute_config()? This state is
totally indepenedent of dsc state
and we are treating this as an independent feature. I think the earlier place
of setting this in intel_dp_compute_link_config()
is correct
Manasi
> +
> if (!intel_dp_supports_dsc(intel_dp, pipe_config))
> return false;
>
> + /* DSC not supported if external DP sink does not support FEC */
> + if (!pipe_config->fec_enable) {
> + DRM_DEBUG_KMS("Sink does not support Forward Error Correction,
> disabling Display Compression\n");
> + return false;
> + }
> +
> /* DSC not supported for DSC sink BPC < 8 */
> if (limits->max_bpp < 3 * DP_DSC_MIN_SUPPORTED_BPC) {
> DRM_DEBUG_KMS("No DSC support for less than 8bpc\n");
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index dd22cdeaa673..997bea5fdf16 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -945,6 +945,9 @@ struct intel_crtc_state {
> u8 slice_count;
> } dsc_params;
> struct drm_dsc_config dp_dsc_cfg;
> +
> + /* Forward Error correction State */
> + bool fec_enable;
> };
>
> struct intel_crtc {
> --
> 2.19.1
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
