The MSM DSI PHY drivers currently hardcode the name and the rate of the PHY ref clock. Get the ref clock from the device tree instead.
Note: testing of this series was limited to SDM845 and the 10nm PHY Major changes in v5: - none (see per-patch change log for minor changes) Major changes in v4: - always use parent rate for 28nm and 28nm 8960 PHYs Major changes in v3: - keep supporting DTs without ref clock for the 28nm and the 28nm 8960 PHYs - added patch to add ref clock to qcom-apq8064.dtsi Major changes in v2: - apply to all MSM DSI PHY drivers, not only 10nm Matthias Kaehlcke (8): dt-bindings: msm/dsi: Add ref clock for PHYs drm/msm/dsi: 28nm 8960 PHY: Get ref clock from the DT drm/msm/dsi: 28nm PHY: Get ref clock from the DT drm/msm/dsi: 14nm PHY: Get ref clock from the DT drm/msm/dsi: 10nm PHY: Get ref clock from the DT arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs ARM: dts: qcom-apq8064: Set 'xo_board' as ref clock of the DSI PHY .../devicetree/bindings/display/msm/dsi.txt | 1 + arch/arm/boot/dts/qcom-apq8064.dtsi | 5 +-- arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +-- arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 +++--- drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 20 +++++++++-- drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c | 23 +++++++++--- drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 36 +++++++++++++------ .../gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 24 ++++++++++--- 8 files changed, 92 insertions(+), 32 deletions(-) -- 2.20.1.415.g653613c723-goog _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel