On 07/04/2012 02:56 AM, Sascha Hauer wrote:
> This patch adds a helper function for parsing videomodes from the devicetree.
> The videomode can be either converted to a struct drm_display_mode or a
> struct fb_videomode.
>
> Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
> ---
>
> changes since v1:
> - use hyphens instead of underscores for property names
>
> .../devicetree/bindings/video/displaymode | 40 ++++++++
> drivers/of/Kconfig | 5 +
> drivers/of/Makefile | 1 +
> drivers/of/of_videomode.c | 108
> ++++++++++++++++++++
> include/linux/of_videomode.h | 19 ++++
> 5 files changed, 173 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/video/displaymode
> create mode 100644 drivers/of/of_videomode.c
> create mode 100644 include/linux/of_videomode.h
>
> diff --git a/Documentation/devicetree/bindings/video/displaymode
> b/Documentation/devicetree/bindings/video/displaymode
> new file mode 100644
> index 0000000..43cc17d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/displaymode
> @@ -0,0 +1,40 @@
> +videomode bindings
> +==================
> +
> +Required properties:
> + - xres, yres: Display resolution
> + - left-margin, right-margin, hsync-len: Horizontal Display timing parameters
> + in pixels
> + upper-margin, lower-margin, vsync-len: Vertical display timing parameters
> in
> + lines
> + - clock: displayclock in Hz
> +
> +Optional properties:
> + - width-mm, height-mm: Display dimensions in mm
> + - hsync-active-high (bool): Hsync pulse is active high
> + - vsync-active-high (bool): Vsync pulse is active high
> + - interlaced (bool): This is an interlaced mode
> + - doublescan (bool): This is a doublescan mode
> +
> +There are different ways of describing a display mode. The devicetree
> representation
> +corresponds to the one used by the Linux Framebuffer framework described
> here in
> +Documentation/fb/framebuffer.txt. This representation has been chosen
> because it's
> +the only format which does not allow for inconsistent parameters.Unlike the
> Framebuffer
> +framework the devicetree has the clock in Hz instead of ps.
This implies you are putting linux settings into DT rather than
describing the h/w. I'm not saying the binding is wrong, but documenting
it this way makes it seem so.
One important piece missing (and IIRC linux doesn't really support) is
defining the pixel format of the interface.
> +Example:
> +
> + display@0 {
> + /* 1920x1080p24 */
> + clock = <52000000>;
Should this use the clock binding? You probably need both constraints
and clock binding though.
Often you don't know the frequency up front and/or have limited control
of the frequency (i.e. integer dividers). Then you have to adjust the
margins to get the desired refresh rate. To do that, you need to know
the ranges of values a panel can support. Perhaps you just assume you
can increase the right-margin and lower-margins as I think you will hit
pixel clock frequency max before any limit on margins.
Rob
> + xres = <1920>;
> + yres = <1080>;
> + left-margin = <25>;
> + right-margin = <25>;
> + hsync-len = <25>;
> + lower-margin = <2>;
> + upper-margin = <2>;
> + vsync-len = <2>;
> + hsync-active-high;
> + };
> +
> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
> index dfba3e6..a3acaa3 100644
> --- a/drivers/of/Kconfig
> +++ b/drivers/of/Kconfig
> @@ -83,4 +83,9 @@ config OF_MTD
> depends on MTD
> def_bool y
>
> +config OF_VIDEOMODE
> + def_bool y
> + help
> + helper to parse videomodes from the devicetree
> +
> endmenu # OF
> diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> index e027f44..80e6db3 100644
> --- a/drivers/of/Makefile
> +++ b/drivers/of/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_OF_MDIO) += of_mdio.o
> obj-$(CONFIG_OF_PCI) += of_pci.o
> obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
> obj-$(CONFIG_OF_MTD) += of_mtd.o
> +obj-$(CONFIG_OF_VIDEOMODE) += of_videomode.o
> diff --git a/drivers/of/of_videomode.c b/drivers/of/of_videomode.c
> new file mode 100644
> index 0000000..50d3bd2
> --- /dev/null
> +++ b/drivers/of/of_videomode.c
> @@ -0,0 +1,108 @@
> +/*
> + * OF helpers for parsing display modes
> + *
> + * Copyright (c) 2012 Sascha Hauer <s.ha...@pengutronix.de>, Pengutronix
> + *
> + * This file is released under the GPLv2
> + */
> +#include <linux/of.h>
> +#include <linux/fb.h>
> +#include <linux/export.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc.h>
> +
> +int of_get_video_mode(struct device_node *np, struct drm_display_mode *dmode,
> + struct fb_videomode *fbmode)
> +{
> + int ret = 0;
> + u32 left_margin, xres, right_margin, hsync_len;
> + u32 upper_margin, yres, lower_margin, vsync_len;
> + u32 width_mm = 0, height_mm = 0;
> + u32 clock;
> + bool hah = false, vah = false, interlaced = false, doublescan = false;
> +
> + if (!np)
> + return -EINVAL;
> +
> + ret |= of_property_read_u32(np, "left-margin", &left_margin);
> + ret |= of_property_read_u32(np, "xres", &xres);
> + ret |= of_property_read_u32(np, "right-margin", &right_margin);
> + ret |= of_property_read_u32(np, "hsync-len", &hsync_len);
> + ret |= of_property_read_u32(np, "upper-margin", &upper_margin);
> + ret |= of_property_read_u32(np, "yres", &yres);
> + ret |= of_property_read_u32(np, "lower-margin", &lower_margin);
> + ret |= of_property_read_u32(np, "vsync-len", &vsync_len);
> + ret |= of_property_read_u32(np, "clock", &clock);
> + if (ret)
> + return -EINVAL;
> +
> + of_property_read_u32(np, "width-mm", &width_mm);
> + of_property_read_u32(np, "height-mm", &height_mm);
> +
> + hah = of_property_read_bool(np, "hsync-active-high");
> + vah = of_property_read_bool(np, "vsync-active-high");
> + interlaced = of_property_read_bool(np, "interlaced");
> + doublescan = of_property_read_bool(np, "doublescan");
> +
> + if (dmode) {
> + memset(dmode, 0, sizeof(*dmode));
> +
> + dmode->hdisplay = xres;
> + dmode->hsync_start = xres + right_margin;
> + dmode->hsync_end = xres + right_margin + hsync_len;
> + dmode->htotal = xres + right_margin + hsync_len + left_margin;
> +
> + dmode->vdisplay = yres;
> + dmode->vsync_start = yres + lower_margin;
> + dmode->vsync_end = yres + lower_margin + vsync_len;
> + dmode->vtotal = yres + lower_margin + vsync_len + upper_margin;
> +
> + dmode->width_mm = width_mm;
> + dmode->height_mm = height_mm;
> +
> + dmode->clock = clock / 1000;
> +
> + if (hah)
> + dmode->flags |= DRM_MODE_FLAG_PHSYNC;
> + else
> + dmode->flags |= DRM_MODE_FLAG_NHSYNC;
> + if (vah)
> + dmode->flags |= DRM_MODE_FLAG_PVSYNC;
> + else
> + dmode->flags |= DRM_MODE_FLAG_NVSYNC;
> + if (interlaced)
> + dmode->flags |= DRM_MODE_FLAG_INTERLACE;
> + if (doublescan)
> + dmode->flags |= DRM_MODE_FLAG_DBLSCAN;
> +
> + drm_mode_set_name(dmode);
> + }
> +
> + if (fbmode) {
> + memset(fbmode, 0, sizeof(*fbmode));
> +
> + fbmode->xres = xres;
> + fbmode->left_margin = left_margin;
> + fbmode->right_margin = right_margin;
> + fbmode->hsync_len = hsync_len;
> +
> + fbmode->yres = yres;
> + fbmode->upper_margin = upper_margin;
> + fbmode->lower_margin = lower_margin;
> + fbmode->vsync_len = vsync_len;
> +
> + fbmode->pixclock = KHZ2PICOS(clock / 1000);
> +
> + if (hah)
> + fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
> + if (vah)
> + fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
> + if (interlaced)
> + fbmode->vmode |= FB_VMODE_INTERLACED;
> + if (doublescan)
> + fbmode->vmode |= FB_VMODE_DOUBLE;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_get_video_mode);
> diff --git a/include/linux/of_videomode.h b/include/linux/of_videomode.h
> new file mode 100644
> index 0000000..a988429
> --- /dev/null
> +++ b/include/linux/of_videomode.h
> @@ -0,0 +1,19 @@
> +/*
> + * Copyright 2012 Sascha Hauer <s.ha...@pengutronix.de>
> + *
> + * OF helpers for videomodes.
> + *
> + * This file is released under the GPLv2
> + */
> +
> +#ifndef __LINUX_OF_VIDEOMODE_H
> +#define __LINUX_OF_VIDEOMODE_H
> +
> +struct device_node;
> +struct fb_videomode;
> +struct drm_display_mode;
> +
> +int of_get_video_mode(struct device_node *np, struct drm_display_mode *dmode,
> + struct fb_videomode *fbmode);
> +
> +#endif /* __LINUX_OF_VIDEOMODE_H */
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
