On Sun, Nov 04, 2018 at 07:26:39PM +0100, Jernej Skrabec wrote: > Currently MP clocks don't consider adjusting parent rate even if they > are allowed to do so. Such behaviour considerably lowers amount of > possible rates, which is very inconvenient when such clock is used for > pixel clock, for example. > > In order to improve the situation, adjusting parent rate is considered > when allowed. > > This code is inspired by clk_divider_bestdiv() function, which does > basically the same thing for different clock type.
This patch seems to break the eMMC support on Olinuxino-Lime2-eMMC boards: EXT4-fs (mmcblk1p4): INFO: recovery required on readonly filesystem EXT4-fs (mmcblk1p4): write access will be enabled during recovery sunxi-mmc 1c11000.mmc: data error, sending stop command sunxi-mmc 1c11000.mmc: send stop command failed $ git bisect log git bisect start # good: [3df407b2a5346db1c48809706ece7a8616c79e0b] mmc: dw_mmc-bluefield: simplify the probe() function git bisect good 3df407b2a5346db1c48809706ece7a8616c79e0b # bad: [00d59fde8532b2d42e80909d2e58678755e04da9] Merge tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc git bisect bad 00d59fde8532b2d42e80909d2e58678755e04da9 # good: [01e421feec0817bb3141eaae4c517410d193d440] Merge branch 'fixes' into next git bisect good 01e421feec0817bb3141eaae4c517410d193d440 # bad: [1eefdec18eded41833401cfd64749643ff72e7da] Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip git bisect bad 1eefdec18eded41833401cfd64749643ff72e7da # good: [eaa76499711535fd64d747cc4ef0d78ab0fd41c6] Merge tag 'mtd/for-4.21' of git://git.infradead.org/linux-mtd git bisect good eaa76499711535fd64d747cc4ef0d78ab0fd41c6 # good: [4e4390ad067a61ce4e7607bd0df31f19a4caa36a] Merge tag 'leds-for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds git bisect good 4e4390ad067a61ce4e7607bd0df31f19a4caa36a # bad: [c2f1f3e0e17d94ab0c66d83e669492cb9e9a3698] Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next git bisect bad c2f1f3e0e17d94ab0c66d83e669492cb9e9a3698 # bad: [e4b99d415c3908581d4703203e1e805f043a3e71] Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip git bisect bad e4b99d415c3908581d4703203e1e805f043a3e71 # bad: [ffe05540d18013db62c43627836a3638e9a2c7aa] Merge branches 'clk-renesas', 'clk-allwinner', 'clk-tegra', 'clk-meson' and 'clk-rockchip' into clk-next git bisect bad ffe05540d18013db62c43627836a3638e9a2c7aa # good: [1a501c8defe950571316d5ddd917bf44f5ed7bd4] Merge branches 'clk-managed-registration', 'clk-spdx', 'clk-remove-basic' and 'clk-ops-const' into clk-next git bisect good 1a501c8defe950571316d5ddd917bf44f5ed7bd4 # good: [e74581b79ddd9b49b8c61e2791fc4dffc0245afb] Merge tag 'meson-clk-4.21-2' of https://github.com/BayLibre/clk-meson into clk-meson git bisect good e74581b79ddd9b49b8c61e2791fc4dffc0245afb # good: [60baf75e3f5b76043c25328ac0c5320aaef5ea41] Merge tag 'clk-renesas-for-v4.21-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas git bisect good 60baf75e3f5b76043c25328ac0c5320aaef5ea41 # bad: [a41f85b6017ee20952a60e4330bcae2527fe2c2a] Merge tag 'sunxi-clk-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner git bisect bad a41f85b6017ee20952a60e4330bcae2527fe2c2a # bad: [ee678706e46d0d185c27cc214ad97828e0643159] clk: sunxi-ng: a64: Fix gate bit of DSI DPHY git bisect bad ee678706e46d0d185c27cc214ad97828e0643159 # bad: [65b6657672388b72822e0367f06d41c1e3ffb5bb] clk: sunxi-ng: Use u64 for calculation of NM rate git bisect bad 65b6657672388b72822e0367f06d41c1e3ffb5bb # good: [db7548934603d9eda12649dff97ea5c29884405d] clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width git bisect good db7548934603d9eda12649dff97ea5c29884405d # bad: [3f790433c3cb27ecaf2ca0e07ac25964e4fd9f15] clk: sunxi-ng: Adjust MP clock parent rate when allowed git bisect bad 3f790433c3cb27ecaf2ca0e07ac25964e4fd9f15 # first bad commit: [3f790433c3cb27ecaf2ca0e07ac25964e4fd9f15] clk: sunxi-ng: Adjust MP clock parent rate when allowed > > Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net> > --- > drivers/clk/sunxi-ng/ccu_mp.c | 64 +++++++++++++++++++++++++++++++++-- > 1 file changed, 62 insertions(+), 2 deletions(-) > > diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c > index 5d0af4051737..0357349eb767 100644 > --- a/drivers/clk/sunxi-ng/ccu_mp.c > +++ b/drivers/clk/sunxi-ng/ccu_mp.c > @@ -40,6 +40,61 @@ static void ccu_mp_find_best(unsigned long parent, > unsigned long rate, > *p = best_p; > } > > +static unsigned long ccu_mp_find_best_with_parent_adj(struct clk_hw *hw, > + unsigned long *parent, > + unsigned long rate, > + unsigned int max_m, > + unsigned int max_p) > +{ > + unsigned long parent_rate_saved; > + unsigned long parent_rate, now; > + unsigned long best_rate = 0; > + unsigned int _m, _p, div; > + unsigned long maxdiv; > + > + parent_rate_saved = *parent; > + > + /* > + * The maximum divider we can use without overflowing > + * unsigned long in rate * m * p below > + */ > + maxdiv = max_m * max_p; > + maxdiv = min(ULONG_MAX / rate, maxdiv); > + > + for (_p = 1; _p <= max_p; _p <<= 1) { > + for (_m = 1; _m <= max_m; _m++) { > + div = _m * _p; > + > + if (div > maxdiv) > + break; > + > + if (rate * div == parent_rate_saved) { > + /* > + * It's the most ideal case if the requested > + * rate can be divided from parent clock without > + * needing to change parent rate, so return the > + * divider immediately. > + */ > + *parent = parent_rate_saved; > + return rate; > + } > + > + parent_rate = clk_hw_round_rate(hw, rate * div); > + now = parent_rate / div; > + > + if (now <= rate && now > best_rate) { > + best_rate = now; > + *parent = parent_rate; > + > + if (now == rate) > + return rate; > + } > + } > + } > + > + return best_rate; > +} > + > static unsigned long ccu_mp_round_rate(struct ccu_mux_internal *mux, > struct clk_hw *hw, > unsigned long *parent_rate, > @@ -56,8 +111,13 @@ static unsigned long ccu_mp_round_rate(struct > ccu_mux_internal *mux, > max_m = cmp->m.max ?: 1 << cmp->m.width; > max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1); > > - ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p); > - rate = *parent_rate / p / m; > + if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) { > + ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p); > + rate = *parent_rate / p / m; > + } else { > + rate = ccu_mp_find_best_with_parent_adj(hw, parent_rate, rate, > + max_m, max_p); > + } > > if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV) > rate /= cmp->fixed_post_div; > -- > 2.19.1 > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to linux-sunxi+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
