This patch adjust the print string of drm_display_mode object
to remove drm_mode_object dependency in meson files.

Signed-off-by: Shayenne Moura <shayenneluzmo...@gmail.com>
---
Changes in v2:
  - Use DRM_MODE_FMT/ARG macros (Daniel)
  - Make the commit message more clear

Changes in v3:
  - No changes

 drivers/gpu/drm/meson/meson_dw_hdmi.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c 
b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index d8c5cc34e22e..0b6c29cdd934 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -365,7 +365,7 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void 
*data,
        unsigned int wr_clk =
                readl_relaxed(priv->io_base + _REG(VPU_HDMI_SETTING));
 
-       DRM_DEBUG_DRIVER("%d:\"%s\"\n", mode->base.id, mode->name);
+       DRM_DEBUG_DRIVER("\"%s\"\n", mode->name);
 
        /* Enable clocks */
        regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100);
@@ -555,12 +555,7 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
        int vic = drm_match_cea_mode(mode);
        enum drm_mode_status status;
 
-       DRM_DEBUG_DRIVER("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 
0x%x\n",
-               mode->base.id, mode->name, mode->vrefresh, mode->clock,
-               mode->hdisplay, mode->hsync_start,
-               mode->hsync_end, mode->htotal,
-               mode->vdisplay, mode->vsync_start,
-               mode->vsync_end, mode->vtotal, mode->type, mode->flags);
+       DRM_DEBUG_DRIVER("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
 
        /* Check against non-VIC supported modes */
        if (!vic) {
@@ -650,8 +645,7 @@ static void meson_venc_hdmi_encoder_mode_set(struct 
drm_encoder *encoder,
        struct meson_drm *priv = dw_hdmi->priv;
        int vic = drm_match_cea_mode(mode);
 
-       DRM_DEBUG_DRIVER("%d:\"%s\" vic %d\n",
-                        mode->base.id, mode->name, vic);
+       DRM_DEBUG_DRIVER("\"%s\" vic %d\n", mode->name, vic);
 
        /* VENC + VENC-DVI Mode setup */
        meson_venc_hdmi_mode_set(priv, vic, mode);
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to