The mode setting handler of the VENC stores the video mode internally, to then convert it to a configuration when programming the hardware. The stored mode is otherwise unused. Cache the configuration directly instead.
Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reic...@collabora.com> Tested-by: Sebastian Reichel <sebastian.reic...@collabora.com> --- drivers/gpu/drm/omapdrm/dss/venc.c | 68 +++++++++++++++--------------- 1 file changed, 34 insertions(+), 34 deletions(-) diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c index 638cfd69ccf6..6cb708e1944e 100644 --- a/drivers/gpu/drm/omapdrm/dss/venc.c +++ b/drivers/gpu/drm/omapdrm/dss/venc.c @@ -301,24 +301,6 @@ static const struct videomode omap_dss_ntsc_vm = { DISPLAY_FLAGS_SYNC_NEGEDGE, }; -static enum venc_videomode venc_get_videomode(const struct videomode *vm) -{ - if (!(vm->flags & DISPLAY_FLAGS_INTERLACED)) - return VENC_MODE_UNKNOWN; - - if (vm->pixelclock == omap_dss_pal_vm.pixelclock && - vm->hactive == omap_dss_pal_vm.hactive && - vm->vactive == omap_dss_pal_vm.vactive) - return VENC_MODE_PAL; - - if (vm->pixelclock == omap_dss_ntsc_vm.pixelclock && - vm->hactive == omap_dss_ntsc_vm.hactive && - vm->vactive == omap_dss_ntsc_vm.vactive) - return VENC_MODE_NTSC; - - return VENC_MODE_UNKNOWN; -} - struct venc_device { struct platform_device *pdev; void __iomem *base; @@ -330,7 +312,7 @@ struct venc_device { struct clk *tv_dac_clk; - struct videomode vm; + const struct venc_config *config; enum omap_dss_venc_type type; bool invert_polarity; bool requires_tv_dac_clk; @@ -450,18 +432,6 @@ static void venc_runtime_put(struct venc_device *venc) WARN_ON(r < 0 && r != -ENOSYS); } -static const struct venc_config *venc_timings_to_config(const struct videomode *vm) -{ - switch (venc_get_videomode(vm)) { - default: - WARN_ON_ONCE(1); - case VENC_MODE_PAL: - return &venc_config_pal_trm; - case VENC_MODE_NTSC: - return &venc_config_ntsc_trm; - } -} - static int venc_power_on(struct venc_device *venc) { u32 l; @@ -472,7 +442,7 @@ static int venc_power_on(struct venc_device *venc) goto err0; venc_reset(venc); - venc_write_config(venc, venc_timings_to_config(&venc->vm)); + venc_write_config(venc, venc->config); dss_set_venc_output(venc->dss, venc->type); dss_set_dac_pwrdn_bgz(venc->dss, 1); @@ -574,16 +544,46 @@ static int venc_get_modes(struct omap_dss_device *dssdev, return ARRAY_SIZE(modes); } +static enum venc_videomode venc_get_videomode(const struct videomode *vm) +{ + if (!(vm->flags & DISPLAY_FLAGS_INTERLACED)) + return VENC_MODE_UNKNOWN; + + if (vm->pixelclock == omap_dss_pal_vm.pixelclock && + vm->hactive == omap_dss_pal_vm.hactive && + vm->vactive == omap_dss_pal_vm.vactive) + return VENC_MODE_PAL; + + if (vm->pixelclock == omap_dss_ntsc_vm.pixelclock && + vm->hactive == omap_dss_ntsc_vm.hactive && + vm->vactive == omap_dss_ntsc_vm.vactive) + return VENC_MODE_NTSC; + + return VENC_MODE_UNKNOWN; +} + static void venc_set_timings(struct omap_dss_device *dssdev, const struct videomode *vm) { struct venc_device *venc = dssdev_to_venc(dssdev); + enum venc_videomode venc_mode = venc_get_videomode(vm); DSSDBG("venc_set_timings\n"); mutex_lock(&venc->venc_lock); - venc->vm = *vm; + switch (venc_mode) { + default: + WARN_ON_ONCE(1); + /* Fall-through */ + case VENC_MODE_PAL: + venc->config = &venc_config_pal_trm; + break; + + case VENC_MODE_NTSC: + venc->config = &venc_config_ntsc_trm; + break; + } dispc_set_tv_pclk(venc->dss->dispc, 13500000); @@ -854,7 +854,7 @@ static int venc_probe(struct platform_device *pdev) mutex_init(&venc->venc_lock); - venc->vm = omap_dss_pal_vm; + venc->config = &venc_config_pal_trm; venc_mem = platform_get_resource(venc->pdev, IORESOURCE_MEM, 0); venc->base = devm_ioremap_resource(&pdev->dev, venc_mem); -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel