Hi Andrey,
Thank you for the patch.
On Tue, Feb 26, 2019 at 11:36:03AM -0800, Andrey Smirnov wrote:
> Simplify tc_set_video_mode() by replacing repreated calls to
> tc_write()/regmap_write() with a single call regmap_multi_reg_write().
> No functional change intended.
>
> Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
> Cc: Archit Taneja <arch...@codeaurora.org>
> Cc: Andrzej Hajda <a.ha...@samsung.com>
> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> Cc: Chris Healy <cphe...@gmail.com>
> Cc: Lucas Stach <l.st...@pengutronix.de>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-ker...@vger.kernel.org
> ---
> drivers/gpu/drm/bridge/tc358767.c | 125 ++++++++++++++++--------------
> 1 file changed, 65 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/tc358767.c
> b/drivers/gpu/drm/bridge/tc358767.c
> index 86ebd49194b7..c85468fcc157 100644
> --- a/drivers/gpu/drm/bridge/tc358767.c
> +++ b/drivers/gpu/drm/bridge/tc358767.c
> @@ -641,10 +641,6 @@ static int tc_get_display_props(struct tc_data *tc)
>
> static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode
> *mode)
> {
> - int ret;
> - int vid_sync_dly;
> - int max_tu_symbol;
> -
> int left_margin = mode->htotal - mode->hsync_end;
> int right_margin = mode->hsync_start - mode->hdisplay;
> int hsync_len = mode->hsync_end - mode->hsync_start;
> @@ -653,76 +649,85 @@ static int tc_set_video_mode(struct tc_data *tc, struct
> drm_display_mode *mode)
> int vsync_len = mode->vsync_end - mode->vsync_start;
>
> /*
> - * Recommended maximum number of symbols transferred in a transfer unit:
> + * Recommended maximum number of symbols transferred in a
> + * transfer unit:
> * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
> * (output active video bandwidth in bytes))
> * Must be less than tu_size.
> */
> - max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
> -
> - dev_dbg(tc->dev, "set mode %dx%d\n",
> - mode->hdisplay, mode->vdisplay);
> - dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
> - left_margin, right_margin, hsync_len);
> - dev_dbg(tc->dev, "V margin %d,%d sync %d\n",
> - upper_margin, lower_margin, vsync_len);
> - dev_dbg(tc->dev, "total: %dx%d\n", mode->htotal, mode->vtotal);
> -
> + int max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
>
> + /* DP Main Stream Attributes */
> + int vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
> /*
> * LCD Ctl Frame Size
> * datasheet is not clear of vsdelay in case of DPI
> * assume we do not need any delay when DPI is a source of
> * sync signals
> */
> - tc_write(VPCTRL0, (0 << 20) /* VSDELAY */ |
> - OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
> - tc_write(HTIM01, (ALIGN(left_margin, 2) << 16) | /* H back porch */
> - (ALIGN(hsync_len, 2) << 0)); /* Hsync */
> - tc_write(HTIM02, (ALIGN(right_margin, 2) << 16) | /* H front porch */
> - (ALIGN(mode->hdisplay, 2) << 0)); /* width */
> - tc_write(VTIM01, (upper_margin << 16) | /* V back porch */
> - (vsync_len << 0)); /* Vsync */
> - tc_write(VTIM02, (lower_margin << 16) | /* V front porch */
> - (mode->vdisplay << 0)); /* height */
> - tc_write(VFUEN0, VFUEN); /* update settings */
> -
> + u32 vpctrl0 = (0 << 20) /* VSDELAY */ |
> + OPXLFMT_RGB888 | FRMSYNC_DISABLED |
> + MSF_DISABLED;
> + u32 htim01 = (ALIGN(left_margin, 2) << 16) | /* H back porch */
> + (ALIGN(hsync_len, 2) << 0); /* Hsync */
> + u32 htim02 = (ALIGN(right_margin, 2) << 16) | /* H front porch */
> + (ALIGN(mode->hdisplay, 2) << 0); /* width */
> + u32 vtim01 = (upper_margin << 16) | /* V back porch */
> + (vsync_len << 0); /* Vsync */
> + u32 vtim02 = (lower_margin << 16) | /* V front porch */
> + (mode->vdisplay << 0); /* height */
> /* Test pattern settings */
> - tc_write(TSTCTL,
> - (120 << 24) | /* Red Color component value */
> - (20 << 16) | /* Green Color component value */
> - (99 << 8) | /* Blue Color component value */
> - (1 << 4) | /* Enable I2C Filter */
> - (2 << 0) | /* Color bar Mode */
> - 0);
> -
> - /* DP Main Stream Attributes */
> - vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
> - tc_write(DP0_VIDSYNCDELAY,
> - (max_tu_symbol << 16) | /* thresh_dly */
> - (vid_sync_dly << 0));
> + u32 tstctl = (120 << 24) | /* Red Color component value */
> + (20 << 16) | /* Green Color component value */
> + (99 << 8) | /* Blue Color component value */
> + (1 << 4) | /* Enable I2C Filter */
> + (2 << 0); /* Color bar Mode */
> + u32 dp0_vidsyncdelay = (max_tu_symbol << 16) | /* thresh_dly */
> + (vid_sync_dly << 0);
> + u32 dp0_totalval = (mode->vtotal << 16) | (mode->htotal);
> + u32 dp0_startval = ((upper_margin + vsync_len) << 16) |
> + ((left_margin + hsync_len) << 0);
> + u32 dp0_activeval = (mode->vdisplay << 16) | (mode->hdisplay);
> + u32 dp0_syncval = (vsync_len << 16) | (hsync_len << 0) |
> + (mode->flags & DRM_MODE_FLAG_NHSYNC) ?
> + SYNCVAL_HS_POL_ACTIVE_LOW : 0 |
> + (mode->flags & DRM_MODE_FLAG_NVSYNC) ?
> + SYNCVAL_VS_POL_ACTIVE_LOW : 0;
> + u32 dpipxlfmt = VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
> + DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 |
> + DPI_BPP_RGB888;
> + u32 dp0_misc = (max_tu_symbol << 23) |
> + (TU_SIZE_RECOMMENDED << 16) |
> + BPC_8;
> +
> + const struct reg_sequence video_mode_settings[] = {
> + { VPCTRL0, vpctrl0 },
> + { HTIM01, htim01 },
> + { HTIM02, htim02 },
> + { VTIM01, vtim01 },
> + { VTIM02, vtim02 },
> + { VFUEN0, VFUEN }, /* update settings */
> + { TSTCTL, tstctl },
> + { DP0_VIDSYNCDELAY, dp0_vidsyncdelay },
> + { DP0_TOTALVAL, dp0_totalval },
> + { DP0_STARTVAL, dp0_startval },
> + { DP0_ACTIVEVAL, dp0_activeval },
> + { DP0_SYNCVAL, dp0_syncval },
> + { DPIPXLFMT, dpipxlfmt },
> + { DP0_MISC, dp0_misc },
> + };
I like the removal of the tc_write() macro, but slightly dislike the
need for this array. Another possible option to handle errors in a nicer
way would be
static int tc_write(struct tc_data *tc, unsigned int reg, unsigned int val,
int *status)
{
if (!*status)
*status = regmap_write(tc->regmap, reg, val);
return *status;
}
...
int err = 0;
tc_write(tc, ..., ..., &err);
tc_write(tc, ..., ..., &err);
tc_write(tc, ..., ..., &err);
tc_write(tc, ..., ..., &err);
tc_write(tc, ..., ..., &err);
return err;
I will let you and the driver author(s) device what would be best.
>
> - tc_write(DP0_TOTALVAL, (mode->vtotal << 16) | (mode->htotal));
> -
> - tc_write(DP0_STARTVAL,
> - ((upper_margin + vsync_len) << 16) |
> - ((left_margin + hsync_len) << 0));
> -
> - tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
> -
> - tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) |
> - ((mode->flags & DRM_MODE_FLAG_NHSYNC) ?
> SYNCVAL_HS_POL_ACTIVE_LOW : 0) |
> - ((mode->flags & DRM_MODE_FLAG_NVSYNC) ?
> SYNCVAL_VS_POL_ACTIVE_LOW : 0));
> -
> - tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
> - DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
> -
> - tc_write(DP0_MISC, (max_tu_symbol << 23) | (TU_SIZE_RECOMMENDED << 16) |
> - BPC_8);
> + dev_dbg(tc->dev, "set mode %dx%d\n",
> + mode->hdisplay, mode->vdisplay);
> + dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
> + left_margin, right_margin, hsync_len);
> + dev_dbg(tc->dev, "V margin %d,%d sync %d\n",
> + upper_margin, lower_margin, vsync_len);
> + dev_dbg(tc->dev, "total: %dx%d\n", mode->htotal, mode->vtotal);
>
> - return 0;
> -err:
> - return ret;
> + return regmap_multi_reg_write(tc->regmap,
> + video_mode_settings,
> + ARRAY_SIZE(video_mode_settings));
> }
>
> static int tc_link_training(struct tc_data *tc, int pattern)
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
