Add DT property for defining the pin used for HPD.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
Cc: devicet...@vger.kernel.org
Cc: Rob Herring <r...@kernel.org>
Reviewed-by: Rob Herring <r...@kernel.org>
---
.../devicetree/bindings/display/bridge/toshiba,tc358767.txt | 1 +
1 file changed, 1 insertion(+)
diff --git
a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
index e3f6aa6a214d..583c5e9dbe6b 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
@@ -12,6 +12,7 @@ Optional properties:
(active high shutdown input)
- reset-gpios: OF device-tree gpio specification for RSTX pin
(active low system reset)
+ - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0
or 1)
- ports: the ports node can contain video interface port nodes to connect
to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
- port@0: DSI input port
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
