This commit adds documentation entry description for KOE's 5.7" display.
Signed-off-by: Lukasz Majewski <lu...@denx.de> --- Previous discussion (and Rob's Reviewed-by) about this patch https://patchwork.kernel.org/patch/10339595/ Changes for v4: - Rebase on top of newest mainline SHA1: 5ac94332248ee017964ba368cdda4ce647e3aba7 Changes for v3 : - New patch --- .../bindings/display/panel/koe,tx14d24vm1bpa.txt | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt new file mode 100644 index 000000000000..be7ac666807b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt @@ -0,0 +1,42 @@ +Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel + +Required properties: +- compatible: should be "koe,tx14d24vm1bpa" +- backlight: phandle of the backlight device attached to the panel +- power-supply: single regulator to provide the supply voltage + +Required nodes: +- port: Parallel port mapping to connect this display + +This panel needs single power supply voltage. Its backlight is conntrolled +via PWM signal. + +Example: +-------- + +Example device-tree definition when connected to iMX53 based board + + lcd_panel: lcd-panel { + compatible = "koe,tx14d24vm1bpa"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + +Then one needs to extend the dispX node: + + lcd_display: disp1 { + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; -- 2.11.0
