On Wed, May 29, 2019 at 08:41:31AM -0600, Jeffrey Hugo wrote: > On Wed, May 29, 2019 at 4:28 AM Brian Masney <masn...@onstation.org> wrote: > > > > On Tue, May 28, 2019 at 08:53:49PM -0600, Jeffrey Hugo wrote: > > > On Tue, May 28, 2019 at 8:46 PM Brian Masney <masn...@onstation.org> > > > wrote: > > > > > > > > On Tue, May 28, 2019 at 07:42:19PM -0600, Jeffrey Hugo wrote: > > > > > > > Do you know if the nexus 5 has a video or command mode panel? > > > > > > > There > > > > > > > is some glitchyness with vblanks and command mode panels. > > > > > > > > > > > > Its in command mode. I know this because I see two 'pp done time > > > > > > out' > > > > > > messages, even on 4.17. Based on my understanding, the ping pong > > > > > > code is > > > > > > only applicable for command mode panels. > > > > > > > > > > Actually, the ping pong element exists in both modes, but 'pp done > > > > > time out' is a good indicator that it is command mode. > > > > > > > > > > Are you also seeing vblank timeouts? > > > > > > > > Yes, here's a snippet of the first one. > > > > > > > > [ 2.556014] WARNING: CPU: 0 PID: 5 at > > > > drivers/gpu/drm/drm_atomic_helper.c:1429 > > > > drm_atomic_helper_wait_for_vblanks.part.1+0x288/0x290 > > > > [ 2.556020] [CRTC:49:crtc-0] vblank wait timed out > > > > [ 2.556023] Modules linked in: > > > > [ 2.556034] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted > > > > 5.2.0-rc1-00178-g72c3c1fd5f86-dirty #426 > > > > [ 2.556038] Hardware name: Generic DT based system > > > > [ 2.556056] Workqueue: events deferred_probe_work_func > > > > ... > > > > > > > > > Do you have busybox? > > > > > > > > > > Can you run - > > > > > sudo busybox devmem 0xFD900614 > > > > > sudo busybox devmem 0xFD900714 > > > > > sudo busybox devmem 0xFD900814 > > > > > sudo busybox devmem 0xFD900914 > > > > > sudo busybox devmem 0xFD900A14 > > > > > > > > # busybox devmem 0xFD900614 > > > > 0x00020020 > > > > > > Ok, so CTL_0 path, command mode, ping pong 0, with the output going to > > > DSI 1. > > > > > > Next one please: > > > > > > busybox devmem 0xFD912D30 > > > > It's 0x00000000 on mainline and 4.17. I used the following script to > > dump the entire mdp5 memory region and attached the dump from 4.17 and > > 5.2rc1. > > > > ok, 0 means autorefresh is not on. Which is fine. My next guess > would be the vblank code checking the hardware vblank counter, which > doesn't exist. > In video mode, there is a frame counter which increments, which can be > used as the vblank counter. Unfortunately, that hardware isn't active > in command mode, and there isn't an equivalent. > > So, the vblank code is going to read the register, and look for an > update, which will never happen, thus it will timeout. There is a > backup path which uses timestamps (no hardware), which you can > activate with a quick hack - make max_vblank_count = 0 at the > following line > https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c#L753
That fixed the issue! I previously observed that mdp5_get_vblank_counter, specifically mdp5_encoder_get_framecount, would always return 0. What's the best way to fix this in mainline? Set that to zero if any of the interface modes is MDP5_INTF_DSI_MODE_COMMAND? Brian