Sphinx need to know when a paragraph ends. So, do some adjustments
at the file for it to be properly parsed.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

that's said, I believe that this file should be moved to the
GPU/DRM documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab+sams...@kernel.org>
---
 Documentation/EDID/{HOWTO.txt => howto.rst}   | 31 ++++++++++++-------
 .../admin-guide/kernel-parameters.txt         |  2 +-
 drivers/gpu/drm/Kconfig                       |  2 +-
 3 files changed, 22 insertions(+), 13 deletions(-)
 rename Documentation/EDID/{HOWTO.txt => howto.rst} (83%)

diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/howto.rst
similarity index 83%
rename from Documentation/EDID/HOWTO.txt
rename to Documentation/EDID/howto.rst
index 539871c3b785..725fd49a88ca 100644
--- a/Documentation/EDID/HOWTO.txt
+++ b/Documentation/EDID/howto.rst
@@ -1,3 +1,9 @@
+:orphan:
+
+====
+EDID
+====
+
 In the good old days when graphics parameters were configured explicitly
 in a file called xorg.conf, even broken hardware could be managed.
 
@@ -34,16 +40,19 @@ Makefile. Please note that the EDID data structure expects 
the timing
 values in a different way as compared to the standard X11 format.
 
 X11:
-HTimings:  hdisp hsyncstart hsyncend htotal
-VTimings:  vdisp vsyncstart vsyncend vtotal
+  HTimings:
+    hdisp hsyncstart hsyncend htotal
+  VTimings:
+    vdisp vsyncstart vsyncend vtotal
 
-EDID:
-#define XPIX hdisp
-#define XBLANK htotal-hdisp
-#define XOFFSET hsyncstart-hdisp
-#define XPULSE hsyncend-hsyncstart
+EDID::
 
-#define YPIX vdisp
-#define YBLANK vtotal-vdisp
-#define YOFFSET vsyncstart-vdisp
-#define YPULSE vsyncend-vsyncstart
+  #define XPIX hdisp
+  #define XBLANK htotal-hdisp
+  #define XOFFSET hsyncstart-hdisp
+  #define XPULSE hsyncend-hsyncstart
+
+  #define YPIX vdisp
+  #define YBLANK vtotal-vdisp
+  #define YOFFSET vsyncstart-vdisp
+  #define YPULSE vsyncend-vsyncstart
diff --git a/Documentation/admin-guide/kernel-parameters.txt 
b/Documentation/admin-guide/kernel-parameters.txt
index 3d072ca532bb..3faf37b8b001 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -930,7 +930,7 @@
                        edid/1680x1050.bin, or edid/1920x1080.bin is given
                        and no file with the same name exists. Details and
                        instructions how to build your own EDID data are
-                       available in Documentation/EDID/HOWTO.txt. An EDID
+                       available in Documentation/EDID/howto.rst. An EDID
                        data set will only be used for a particular connector,
                        if its name and a colon are prepended to the EDID
                        name. Each connector may use a unique EDID data
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 6b34949416b1..c3a6dd284c91 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -141,7 +141,7 @@ config DRM_LOAD_EDID_FIRMWARE
          monitor are unable to provide appropriate EDID data. Since this
          feature is provided as a workaround for broken hardware, the
          default case is N. Details and instructions how to build your own
-         EDID data are given in Documentation/EDID/HOWTO.txt.
+         EDID data are given in Documentation/EDID/howto.rst.
 
 config DRM_DP_CEC
        bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
-- 
2.21.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to